Specifications

60 • Operating Instructions ER-5200/ER-5200M series Electronic Cash Register AU
Table Management and Clerk Interrupt Operations
Overview
The ER-5200/ER-5200M Series can employ a manual previous balance, hard check (Monthly
Accounts), or soft check (Restaurant Bill) system. (You must select hard or soft check posting in
Memory Allocation Programming - the default selection is soft.)
There are two methods in ER-5200/ER-5200M Series to manage check track. One is table
management system and the other is clerk interrupt system. If you want to use clerk interrupt system.
First, Program as below.
To Enter Clerk Interrupt System (To Exit Table Management system)
1. Program Clerk Secret Code.
Please check Memory Allocation in Service Mode for numbers of Clerks in the system. Also see
“Secret Code Programming” to program Clerk Secret Code.
2. Set system option #2 to a value of 1. See "System Option Programming".
3. Set system option #26 to a value of 1. See "System Option Programming“.
To Exit Clerk Interrupt System (To Enter Table Management system)
1. Set system option #26 to a value of 0. See "System Option Programming".
2. Set system option #2 to a value of 0. See "System Option Programming".