Operation Manual

Auro D208/D210

Using a Stereo Line Level Signal

• Be sure that the Auro D208/D210 Power switch is set to the o position.

• Turn the LEVEL control fully counterclockwise to the o position.

• Connect the power cable to an AC socket.

• Using standard XLR or 1/4” cables, connect the line level signals from a mixer or keyboard into the

Auro Inputs.

• Switch the Power switch to the ON position.

• Now, run an audio signal from your mixer (like music from a CD) while slowly raising the Auro’s

Level control until you have reached the desired level.

Connecting a Stereo Signal Source