User Manual

Installing the Meteor Mic

Installing the Meteor Mic is a simple procedure that takes just a few minutes. Simply connect the

included USB cable and begin recording. The following sections of this manual provide detailed

instructions on setting up your Meteor Mic in MAC OS or Windows.

Windows 7 & Windows Vista

1. The rst time you plug the Meteor Mic into a USB port, Windows 7 or Vista will install the

universal drivers for that port. A balloon will pop up, telling you the computer has found the

Meteor Mic.

2. When it is nished installing the drivers, a balloon pop up will say “Your device is installed and

ready to use.”

Note: This balloon will only pop up when you rst plug the device into a particular USB port.

3. To set the Meteor Mic as your default device for sound playback and recording, or to change

its settings, click the Start button, click Control Panel and then click Sound. Under the Playback

and Recording tabs, you can select the Samson Meteor Mic from the menus and use the Set

Default button to set it as the default device.

4. To set the gain of the microphone, click the Properties button, and then select the Levels tab.

You can choose to view the Microphone volume level as either a percentage or in dB, by right