Specifications

Studio GT

Studio GT Rear Panel Layout

1. 1/8” AUX INPUT – 3.5mm stereo input jack for connecting a second line level

signal source, like an MP3 player. This input is not sent through the USB output.

2. RCA INPUT – Used to connect signals from unbalanced, –10dBV devices, like a

mixer. The Red connector is for the Right input and the White is for the Left input.

3. USB Connector – Connect the supplied USB cable to this rear panel USB “B”

connector.

4. LEFT SPEAKER OUTPUT – Push Terminals for connecting the Left-side Extension

Speaker.

5. POWER SWITCH – Main power switch. When set to the ON position, the front

panel green LED illuminates indicating the Studio GT is powered up and ready for

operation.

6. AC INLET - Connect the supplied IEC power cable here.

7. TERMINAL CUP – Push Terminals for connecting the Left-side Extension Speaker

to the Active (Right-side) speaker.

8. TUNED PORT - Quiet port design offering linear extended low frequency

response.