User Manual
Owners Manual6
If you feel that the level of the microphone needs further adjustment, press and hold the AH2 Multi-Function Switch while
the unit is powered on until the Status Indicator turns o, and release the switch. Then press and hold the Multi-Function
Switch again for 5 seconds. The AH2 Status Indicator will rst ash GREEN then ash YELLOW to show that you are in the
Volume Adjustment mode. Press and release the Multi-Function Switch once, and the microphone volume will increase one
level. To continue to adjust the microphone volume, press and release the Multi-Function Switch until the maximum level
is reached. There are 5 levels. With each increasing level, the Status Indicator will ash faster. After level 5 is reached, the
transmitter will cycle back down through the levels each time the Multi-Function Switch is pressed. As the levels decrease,
the Status Indicator ashes slower. When the desired level is reached, release the Multi-Function Switch. The AH2 will return
to normal operation after 10 seconds, and the Status Indicator will be steady GREEN.
12. Do a walk-around through the intended area of coverage while observing the AR2’s Status Indicator; it should stay steadily
GREEN, indicating sucient RF reception in all areas of coverage. If the AR2’s Status Indicator lights YELLOW, it designates
RF dropout or muted receiver. Reposition the device (or its antennas) as necessary. If extended range coverage is required,
another AR2 true diversity receiver (set to the same channel as the transmitter) should be used.
13. If you have followed all the steps above and are experiencing diculties, please call Samson Technical Support
(1-800-372-6766) between 9 AM and 5 PM EST. If you purchased your system outside of the U.S., please contact your local
distributor.
Quick Start