User's Manual

Concert 99 Wireless System

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

The CR99 receiver can be installed into a standard 19” rack for transport or permanent

installation using the included rack ears. Follow the simple steps below to mount the

CR99:

Rack Mounting

Attach the included rack ears by screwing each

rack ear into either side of the CR99.

Position the CR99 receiver into an avail-

able rack space and slide in until the

rack ears are touching the rails of the

rack case and are aligned with the rack

rail holes.

Mount the receiver into the rack using

the appropriate size rack screws (not

included). To ensure equal tension and

balance when installing the receiver, you

should secure screws in a crisscross pat-

tern of opposite corners: top left -> bot-

tom right -> top right -> bottom left.

In order to mount two CR99 receivers in one rack

space, the system includes a center connection

piece. Screw the center connection piece into bot-

tom of each receiver and attach the short rack ears

to each receiver.

Mount the receivers into the rack using the

crisscross pattern described above.