Datasheet
General
● TAPING METHOD
There are empty holes at both start part and end part of carrier tape. <Fig 5>
<Fig 5>
Reel
Packed Par t Empty Part Lead Par t
Adhesion Tape
*********
Start
Empty Portion Chips Empty Por tion Lead Par t
10 Pitches
or more
End
5 ,000 Pitches
or
20,000 Pitches
10 Pitches
or more
2 00~ 250 mm
Note
① The resistor should move in the pocket freely.
② The resistor should not adhere to the top or bottom tape.
③ There should be no vacant pocket.
④ Peeling strength of the top tape should be within 5gf and 80gf. <Fig 6>
<Fig 6>
0~10
°
Top Tape
Chip Resistor
Carrier Tape
Botto
m
Ta
p
e
F
Peeling