User Manual
Table Of Contents
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_EN
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_CFR
- Consignes de sécurité
- Remarques importantes sur les consignes de sécurité
- Symboles de sécurité importants
- Consignes de sécurité importantes
- AVERTISSEMENT CONCERNANT LA PROPOSITION 65 DE L'ÉTAT DE CALIFORNIE
- Avertissements importants concernant l'installation
- Mises en garde pour l'installation
- Avertissements importants concernant l'utilisation
- Mises en garde concernant l'utilisation
- Avertissements importants concernant le nettoyage
- Notification de réglementation
- Installation
- Avant de démarrer
- Cycles
- Entretien
- Dépannage
- Caractéristiques techniques
- Consignes de sécurité
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_MES
- Información sobre seguridad
- Lo que necesita saber sobre las instrucciones de seguridad
- Símbolos de seguridad importantes
- Precauciones de seguridad importantes
- PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA
- Advertencias fundamentales para la instalación
- Precauciones para la instalación
- Advertencias fundamentales para el uso
- Precauciones de uso
- Advertencias fundamentales para la limpieza
- Aviso regulatorio
- Instalación
- Antes de comenzar
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Especificaciones
- Información sobre seguridad
English
Operations
English46
Calibration
You can run calibration again for accurate weight detection.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Calibration, and then tap OK.
- Calibration does not start if the door is not closed properly.
- The drum rotates clockwise and anticlockwise for about 3 minutes.
3. When calibration is complete, the "Calibration complete" message appears on the display and the
washer turns off automatically.
Wi-Fi
You can turn the washer's Wi-Fi on or off.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Wi-Fi, and then tap OK.
3. Tap OK to select On or Off.
- The washer's Wi-Fi is off as a factory default setting. However, the washer's Wi-Fi turns on
automatically when you turn on the washer for the first time. Then, the final Wi-Fi setting maintains
regardless of the washer power status.
- Once you turn on the washer's Wi-Fi and connect to a network, the washer remains connected to the
network even when you turn off the power.
- The Wi-Fi indicates that the washer is connected to the router through the Wi-Fi connection.
Language
You can change the system language.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Language, and then tap OK.
3. Turn the Navigation dial to select the desired language, and then tap OK.
Self Diagnosis
You can use this function to check if there are any abnormal signs on your washing machine.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Self Diagnosis, and then tap OK.
- Self Diagnosis starts immediately and "Testing..." is displayed during the self diagnosis process.
- Once the self diagnosis process starts, only the button remains active.
- If the washing machine detects any errors, an information code and the solution is displayed on the
control panel.
Factory Reset
You can reset the washer.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Factory Reset, and then tap OK.
- Your washer resets to the factory setting.
Untitled-3 46 2022-05-27 11:00:50