User Manual
Table Of Contents
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_EN
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_CFR
- Consignes de sécurité
- Remarques importantes sur les consignes de sécurité
- Symboles de sécurité importants
- Consignes de sécurité importantes
- AVERTISSEMENT CONCERNANT LA PROPOSITION 65 DE L'ÉTAT DE CALIFORNIE
- Avertissements importants concernant l'installation
- Mises en garde pour l'installation
- Avertissements importants concernant l'utilisation
- Mises en garde concernant l'utilisation
- Avertissements importants concernant le nettoyage
- Notification de réglementation
- Installation
- Avant de démarrer
- Cycles
- Entretien
- Dépannage
- Caractéristiques techniques
- Consignes de sécurité
- WF8700B_WF6700B-MD_SimpleUX_UM_DC68-04386B-01_MES
- Información sobre seguridad
- Lo que necesita saber sobre las instrucciones de seguridad
- Símbolos de seguridad importantes
- Precauciones de seguridad importantes
- PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA
- Advertencias fundamentales para la instalación
- Precauciones para la instalación
- Advertencias fundamentales para el uso
- Precauciones de uso
- Advertencias fundamentales para la limpieza
- Aviso regulatorio
- Instalación
- Antes de comenzar
- Funcionamiento
- Mantenimiento
- Solución de problemas
- Especificaciones
- Información sobre seguridad
English
Troubleshooting
English64
Code Action
OC
Water has overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local Samsung
service center.
LC, LC1
Check the drain hose.
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service center.
3C
Check the drum motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service center.
HC
High temperature heating check.
• If the information code remains, contact a customer service center.
1C
The Water Level sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
AC
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
AC6
Check communications between the main and the inverter PBAs.
• Depending on the state, the machine may automatically returns to normal
operation.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
DC1
The Main Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
If any information code keeps appearing on the screen, contact a local Samsung service center.
Untitled-3 64 2022-05-27 11:00:52