User manual

102
Screen Adjustment
4
4 Screen Adjustment
4.6 Image Lock
Enhance the picture quality by removing noise (static) such as flickering and shaking.
This option is available when the input source is PC.
4.6.1 Configuring the Image Lock Settings
This product can only be controlled by using the remote control.
1 Press MENU on the remote control.
2 Press / to move to Picture and press [ ].
3 Press / to move to Image Lock and press [ ].
The following screen will appear.
z Coarse
Remove vertical noise (stripes) on the screen.
If the screen is in a different position after the frequency is adjusted using Coarse, move the
screen to the center by using the H-Position/V-Position menu.
z Fine
Remove horizontal noise (stripes) on the screen.
If noise is not completely removed after Fine adjustment, adjust the frequency using Coarse
until noise is minimized and then adjust using Fine again.
z H-Position
Adjust the screen position. The screen can be moved left or right.
z V-Position
Adjust the screen position. The screen can be moved up or down.
4 Press / to move to the option you want and press [ ].
5 Press / to adjust the value and press [ ]. The change will be applied.
I m a g e L o c k
M o v e E n t e r
R e t u r n
C o a r s e 2 2 0 5
F i n e 1 0 0
H - P o s i t i o n 5 0
V - P o s i t i o n 5 0