User manual

128
Settings
6
6 Settings
6.6 Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple
displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide.
Some models may not support the MagicInfo function.
If more than four displays are connected horizontally and vertically, it is recommended that you use an
input resolution of XGA (1024 x 768) level or higher to prevent a dark picture due to degradation in the
contrast or color intensity.
6.6.1 Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
Enabling Video Wall
This product can only be controlled by using the remote control.
1 Press MENU on the remote control.
2 Press / to move to Setup and press [ ].
3 Press / to move to Video Wall and press [ ].
4 Press / to select the option you want and press [ ].
5 The selected option will be applied.
V i d e o W a l l
M o v e E n t e r
R e t u r n
O f f
O n