User manual

137
Settings
6
6 Settings
6.7.4 Side Gray
Select the brightness of the grey color for blank parts on the screen. (Off / Light / Dark)
Setting Side Grey
This product can only be controlled by using the remote control.
1 Press MENU on the remote control.
2 Press / to move to Setup and press [ ].
3 Press / to move to Safety Screen and press [ ].
4 Press / to move to Side Gray and press [ ].
5 Press / to move to the option you want and press [ ].
6 The selected option will be applied.
6.8 Resolution Select
If the picture is not normal even when the resolution of the graphics card is one of the following, you can
optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768
6.8.1 Changing the Resolution (Resolution Select)
This product can only be controlled by using the remote control.
1 Press MENU on the remote control.
2 Press / to move to Setup and press [ ].
3 Press / to move to Resolution Select and press [ ].
4 Press / to move to the option you want and press [ ].
5 The selected option will be applied.
The Resolution Select option is only enabled when the input source is PC.