User manual

61
3 Using MDC
3
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display
devices simultaneously using a PC.
3.1 Configuring Settings for Multi Control
Assign an individual ID to your product.
3.1.1 Configuring settings for Multi Control
This product can only be controlled by using the remote control.
1 Press MENU on the remote control.
2 Press / to move to Multi Control and press [ ].
z ID Setup
Assign an ID to a set. (Range: 00~99)
Press or to select a number, and press [ ].
z ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
3.2 Connection Using the RS232C Cable
1 Connect the RS232C cable to [RS232C IN] on the product and RS232C OUT on the PC.
RS232C IN