用户手册

touchscreen won't work. The setting of multi-touchscreens at the same PC com-
prising of Steps: the butt mark will appear on the center of each monitor
screen in master slave sequence operated by program after user clicks "Select
Monitor". If does so, use may click the center of the butt mark so as to ac-
knowledge the mounted-touchscreen. If there is no information of touchscreen
on the monitor, user is required to press "Esc" or wait for 15 seconds, then
program will pass the current the setting of touchscreen and continue auto-
matically the next one; Double click the setting of touchscreen in the list.
User may select the monitor related to each IR touchscreen and click "OK" rep-
resenting the save and exit after the select-dialog box pops up. Finishing the
above operations, program will show the number of monitor relevant to each
touchscreen in the list of "Monitor".
2. Select the touchscreen you want in the list and Click [Calibrate]. After cal-
ibration, the item "Calibrated" will show "Yes".
使用软件