用户手册

is only available in Mouse Emulation mode. User may adjust the number of “de-
lay” in “Right Click Settings” if finding the pop-up time is either fast or
slow. Notice: the higher the value, the slower the pop-up time. "Delay" unit
is "millisecond". The "area" is used for adjusting the jitter-range of the
touch surface within limit of error (unit: pixel). The higher the value, the
wider the jitter-range. Right Click menu will pop up so long as the finger
contacts the screen for a while within the range.
7. Enable Double Click
Same as the function of Mouse Double Click. Double click on the same setting
area of objects in a short time. The "Double Click Settings" property can be
set so as to get the best performance on Double Click. "Speed" unit is "mil-
lisecond". The higher the value, the longer the effective time interval be-
tween the double clicks raising the function of Double Click. "Area" is used
for either amplifying or reducing the Double Click area. The higher the value
(unit: pixel), the more sensitive the response of Double Click. Double-click
should be utilized in the applications such as "Click on touch", "Click on
Release", "Mouse Emulation".
8. Enable Delay Touch
After this function is enabled, high speed touch or scratch on the screen be-
comes ineffective. It is the very effective for touch to maintain steadily for
a time in specified area. This function is for banking and industrial control
applications, such as ATM, Switches of industrial equipment and used in both
Click on touch and Click on Release modes. The "Delay Touch Setting" properties
can be set selectively. The higher the value (unit:millisecond), the longer
the touch-delay time; "area" is utilized to regulate the effective area in
which finger maintains on the touch plane. The higher the value (unit: pixel),
the wider the effective area.
9. Prevent System to Standby
Unable (default); this function may prevent System from Standby. When the IR
touchscreen is provided with serial ports as a simple output device, the func-
tion may enable recovery out of the state of automatic system standby.
10. Drag Delay
The function show the amount of millisecond "Drag Delay" will take to be en-
abled after you click that. Drag Delay may be adjusted to the correct value if
the object can not be precisely selected or if jitter happens to cursor when
you touch. The unit is millisecond.
11. False touch rejection
The snow and rain drop will be mistakenly a single touch. So the function of
"False touch rejection" may be selected in driver to avoid the above error
without the normal manipulation. The function of "Enable Delay Touch" will do
the work to prevent the false touch. Instructions see Attachment : Setting of
touchscreen in strong light, rain and snow condition.
Serial port Settings
1. Installation of the driver of serial port finished, choose "start" - "All Pro-
grams" - "IRTOUCHSYSTEMS" - "Serial Port Settings". In the list show both the
name of IR touch device installed and the number of the serial ports. You may
choose [Install] when some serial ports are available or choose [Remove] to
uninstall the driver if you don't want to use the touchscreen.
使用软件