User manual

6
Installation Procedure
English
Installation Procedure
CAUTION
• Depending on the condition of power supply, unstable
power or voltage may cause malfunction of the parts
or control system. (At the ship or places using power
supply from electric generator...etc)
• Install the unit in a place where water can drain
smoothly.
• If you have any difficulty finding installation location
as prescribed above, contact your manufacturer for
details.
• Be sure to clean the sea water and the dust on the
heat exchanger of the outdoor unit and apply a
corrosion inhibitor on it. (At least once in a year.)
Outdoor unit dimensions
(Unit: mm)
A Type
AC090MXADKH/AC090MXADNH/AC100MXADKH/
AC100MXADNH/AC120MXADKH/AC120MXADNH/
AC120MXASEH
998 977
537 528
620
940
330
384 360
675
B Type
AC140MXADKH/AC140MXADNH
620
330
384 360
1210 1185
940
567 558
675
Minimum clearances for the outdoor unit
When installing 1 outdoor unit
(Unit: mm)
300 or more
1500 or more
300 or
more
600 or
more
300 or
more
2000
or more
1500 or more
600
or more
300
or more
1500 or more
300 or
more
When installing more than 1 outdoor unit
(Unit: mm)
1500
or more
600
or more
3000
or more
3000
or more
300
or more
600
or more
600
or more
1500
or more
300
or more
1500
or more
600
or more
600
or more