Product specifications
Samsung Electronics 13
No Parts Procedure Remark
1 Panel 1) Remove 4 cover screws from the Hydro Unit.
(Use + Screw Driver)
2 Controller
&
Manometer
1) Remove 3 screws from it.
(Use + Screw Driver)
2) Remove pressure sensor by adjustable wrench.
(Use adjustable wrench-230kgf·cm)
3) Pull the manometer out.
4) Pull the LED display up and out.
3-1 Hydro Unit
QAEN160YD
䭑
/AEN080YD
䭑
Be sure that the power switch is in the “OFF” and the power source cord shall be unplugged prior to disassembly and reassembly works.
RC160MHXGA_SM_E_34513A(1)_1~3.indd 13