- AH68-01633B (Rev 0.0) MP3, WMA , ASF and Ogg Playback Removable Storage Device Direct MP3 Recording 3D Sound USB 2.
Contents Safety Instructions................................................................................................................................................4 Features ..............................................................................................................................................................6 Components ........................................................................................................................................................
Safety Instructions Safety Instructions Do not expose to extreme temperatures (above 95°F or below 23°F). Do not expose to moisture. Do not subject the unit to severe impact, or place heavy objects on it. Do not let any foreign matter spill into the device. I Earphones Follow Traffic Safety Instructions ● Do not use the earphones while driving an automobile or riding a bicycle. It’s not only dangerous, but also against the law.
Features ● The player supports playback of MP3, WMA, ASF and Ogg. Removable Storage Device ● You can easily copy and paste files to the player using Windows Explorer. Direct MP3 Recording ● You can convert music from CDs, cassettes, and radio into MP3 files without a PC. 3D Sound ● 6 The 3D surround feature adds spaciousness to the sound. USB 2.0 Support ● ENG MP3, WMA , ASF and Ogg Playback Features Maximum data speed transfer of 18 Mbps.
Location of Controls (yepp) ENG Components Earphones Hook Display Carrying case Stylish necklace type earphones Installation CD MENU, Navigation button/ Move to Track/Speed Search/ Volume Button User manual Loop Repeating Button Play/Pause Button Player One Battery Line In Cable USB Cable (1.
Connecting the player to PC System Requirements. I Display Equalizer, SRS indicator Track Number indicator Play/Stop/Pause indicator Play mode indicator Remaining Battery Power indicator Title (track & artist) indicator Playtime indicator ● Pentium 200MHz or greater ● Windows 98 SE/ME/2000/XP ● 40MB of available hard disk space ● CD-ROM drive (double speed or greater) ● USB port (2.0) supported ● VGA graphic ✍ Note - Install the operating system in Administrator Account mode for Windows 2000 or XP.
2 Follow the instructions in the window to complete the installation. Connecting the player to PC I Connecting yepp to PC with the USB cable ENG Connecting the player to PC 1 Connect the USB cable to the USB port on the computer. N N 2 Connect the other end of the USB cable to the USB cable connection port on the bottom of the player. ● If you disconnect the USB cable from your PC while implementing a command or initializing during USB driver installation, your PC may not function correctly.
How to check USB driver Windows 98: Control Panel ➝ System ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-T6 Windows 2000: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Disk Drives ➝ Samsung yepp YP-T6 USB Device Windows XP: Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝ Universal Serial Bus controllers ➝ Disk Drives ➝ Samsung yepp YP-T6 USB Device Manual Installation of USB Driver Go to “Downloading/Uploading files” if the USB driver is in installed.
Manual Installation of USB Driver 4 After selecting the driver, 5 Click [Next]. click [Update Driver]. Manual Installation of USB Driver I In Windows 98 N ENG Follow the instructions in the window to complete the installation. N USB driver location [CD ROM]\setup\Drivers 6 Select [Search for a suitable driver for my device] and then click [Next]. 7 Click [Next] to finish. N : You must reboot your computer to complete the installation.
I Downloading/Uploading files 1 Connect the player to your PC with the supplied USB cable. 2 Open Windows Explorer on PC. ● Removable Disc is displayed in Windows Explorer. Using the removable storage(PC) 2 When the [Stop a Hardware device] message appears, press the [OK] button and disconnect the USB cable. N ENG Using the removable storage(PC) 3 Select the file to save and drag-and-drop it into the removable disk icon.
Installing yepp Studio To View Help on yepp Studio 1 Insert the Installation CD into CD-ROM drive. 2 Select language Select [Install yepp Studio]. Run yepp Studio and press F1. ● Help will appear. Move the arrow to the top of yepp Studio and right click on the mouse. The following selection window will appear. ENG yepp Studio is the program that can convert and play back the music files in PC. ● Click on Help and the Help window will appear.
Playing Music and Turning Off the Device Power On : Press the button to turn on the power. Power Off : Press and hold the button to turn off the power. In Hold mode, all buttons are disabled. Slide the switch in the direction of the arrow. ❈ When the button is pressed, the “ ENG I Turning Power On and Off HOLD Function HOLD!” message will appear on the display. I Playing Music (Power On) Press the button. Recording Voice ● Playback starts.
MP3 Encoding Searching for Music/Voice Files refer to “Changing Mode”. 1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable. To search for specific parts during play ● Press and hold the joystick left or right during playback to search for the part you want to listen to. ● Release the joystick to resume play normally.
Loop Repeating MENU Options Press and hold the While playing music files, press the A↔B button briefly at the beginning of the loop you want to set. Use , button to switch to MENU mode. to move and press the Press and hold the ENG Starting Point button briefly to select the menu you want. button to exit the MENU mode. A↔ appears in the display. Ending Point Press the A↔B button briefly again to set the end of the loop. A↔B appears in the display. The loop is played repeatedly.
Using Navigation 1 Press the button to enter Navigation mode. or press and hold the button to move to Menu and then select Navigation in Menu. 2 Select the file or folder that you want to play. ● ● ● ● : When moving to a higher-level folder. : When moving to a lower-level folder. , : When moving to a file or folder in the same directory. : Move to the next folder down. When there is not a lower folder, the selected file will be designated as part of the playlist.
Using Navigation Setting Playlist I Setting Playlist - Move to the file you want in Navigation mode and press the Playing Folder button. ENG I Playing/Exiting Folder ● The selected file will be marked. 1 Press the 2 Use , ● When " button to move to the Navigation mode. to move to the folder you want and press the ● To exit the playlist setting, move to the marked file in Navigation mode and press the button. button again. " appears, the selected file will be played.
Selecting the Playmode 1 Select Settings in the MENU. (refer to “MENU Options”) 1 Select Play Mode in Settings. 2 In Settings, use 2 In Play mode, use press the , to move to the function you want and button to select. ● To move to a previous menu, use the ENG Setting the Advanced Functions , to move to the mode you want and press button to select. or select Return. ● Normal: To play all the tracks in order one time. ● Repeat one: To repeat one track. ● Repeat all: To repeat all tracks.
Setting the EQ mode Setting the EQ mode 1 Select My Sound in Settings. 2 In My Sound, use , to move to the sound mode you want and press ● Use , to select the SRS function you want and then press the button. button. ENG the I WOW Set ● The SRS function is applied only when you select the SRS, TruBass or WOW in the Preset EQ.
Setting the EQ mode ● If User is selected in Preset EQ, EQ can be set to your preference in the User EQ Set. ● Use , to move to right or left and use , to adjust the level. Press the is a trademark of SRS Labs, Inc. WOW technology is incorporated under license from SRS labs, Inc.. - Please adjust the volume to a suitable level, as the volume may increase in the SRS setting. - This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz. - The SRS function is not set for voice recording files.
Display [ Jog ] ● Use , to set the Light-On time from Off to 60 seconds. ● When set to On, the Light stays on continuously. Tag ● Use , to select Tag On or Off. ● On: Display the Tag information if the music file has Tag information. Display the file name if the music file has no Tag information. ● Off: Display the name of music file. ENG Backlight Display [ LCD ] ● Use , to set the LCD Light-Off time from Off to 60 seconds ● When set to On, the Light stays on continuously.
Setting the System Setting the System Select System in Settings. ● Use , to select Resume On or Off. ● On: Play back music from the part of music you listened last if you play it back again after stopping. ● Off: Play back music from the beginning of music if you play it back again after stopping. Default vol ● Use , to set the default volume from 0 to 30(Max). ● If the power is turned on again after having adjusted the volume above the default value, music is played at the default volume.
Encoding Power Off Time Select Record in Settings. Select Time in Settings. ● Use , to set the encoding bit rate. ● When encoding music into an MP3 file, you can select one of the following bit rates: 32Kbps, 48Kbps, 64Kbps, 96Kbps and 128Kbps. AutoSync ● Use , to set the AutoSync Time from 1 to 5 seconds. ● AutoSync Time is a function for separating and saving MP3 files when there is no sound for a set time during MP3 encoding.
Managing Files MENU Table Select File in Settings. ENG I Deleting 1 Select Delete in File. 2 Use , to move to the file you want to delete and then press the button. 3 Use , to move to Confirm and then press the button. ● The selected file will be cleared. I Formatting 1 Select Format in File. 2 Use , to move to Confirm and then press the button. ● The player will be formatted. ✍ Note - All files will be deleted when formatting the built-in memory.
Troubleshooting The software doesn’t work The player keeps being turned off. ● Refer to the System Requirements ● In Stop mode, the power is automatically turned off after ten seconds (changes depending on settings). ● Check to see if there are files saved in it. The player does not work and the LCD displays nothing. ● Check the battery capacity ● Check to see if the battery is inserted to the right poles ( + , – ) ● After connecting it to PC, execute YP-T6 Updater in the desktop to update the product.
Specifications Model Built-in Memory capacity Voltage Playing time Dimensions/Weight Case Noise Ratio Earphones Jack Output Power Output Frequency Range Operating Temperature Range File Support YP-T6 128MB(YP-T6 H), 256MB(YP-T6 V), 512MB(YP-T6 X), 1GB(YP-T6 Z) 1.5V X 1 (AAA/LR03 size alkaline battery) lasts up to 20hours (Alkaline battery, MP3 128Kbps, Vol level 15) 22 X 55 X23 mm / 30 g (without battery) Plastic/Aluminum 89dB with 20KHz LPF 10mW/CH (16 Ω) 20Hz~20KHz -5 ~ +35°C(23~95°F) MPEG1/2/2.