Instruction manual

Page 4 of 13 Report No.: 255837
IEC60335_2_40F – ATTACHMENT 1
EN 60335-1, EN 60335-2-40
Clause Requirement – Test Result – Remark Verdict
ZC
ANNEX ZC (NORMATIVE) (EN 60335-1, EN 60335-2-40)
NORMATIVE REFERENCES TO INTERNATIONAL PUBLICATIONS WITH THEIR
CORRESPONDING EUROPEAN PUBLICATIONS
—
Normative references to international publications
with their corresponding European publications
(EN 60335-1/A1, EN 60335-1/A2, EN 60335-2-40)
P
ZD
ANNEX ZD (INFORMATIVE) (EN 60335-1, EN 60335-2-40)
IEC AND CENELEC CODE DESIGNATIONS FOR FLEXIBLE CORD
—
List of code designations for different types of
flexible cords
P
National Differences for Austria
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
National Differences / Deviations for Belgium
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C2b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
National Differences / Deviations for Denmark
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
7.12
Requirements regarding marking tag of power
supply cord and connection of earthing wire for
class I appliances delivered without plug
N/A