Instruction manual

Page 7 of 13 Report No.: 255837
IEC60335_2_40F – ATTACHMENT 1
EN 60335-1, EN 60335-2-40
Clause Requirement – Test Result – Remark Verdict
National Differences / Deviations for Iceland
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
National Differences / Deviations for Ireland
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
Only plugs according to standard sheets B2 and C5
allowed (see also annex ZB)
N/A
25.8 Replacement of line for 10 A and 16 A by: —
> 10 A and ≤ 13 A 1,25 mm²
N/A
> 13 A and ≤ 16 A 1,5 mm²
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
ZB ANNEX ZB (INFORMATIVE), A-DEVIATIONS (EN 60335-1, EN 60335-2-40)
—
25.6
These regulations apply to all plugs for domestic use
at a voltage of not less than 200 V and allow only
plugs complying with I.S. 401:1997, or equivalent, to
be fitted to domestic appliances
No plugs. N/A