Instruction manual

Page 8 of 13 Report No.: 255837
IEC60335_2_40F – ATTACHMENT 1
EN 60335-1, EN 60335-2-40
Clause Requirement – Test Result – Remark Verdict
National Differences / Deviations for Italy
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
Only plugs listed in CENELEC Report
R0BT-005:2001 allowed
Deleted. —
ZB ANNEX ZB (INFORMATIVE), A-DEVIATIONS (EN 60335-1, EN 60335-2-40)
—
7.1 Voltage is 220 V/380 V
220V covered.
Rated: 220-240V~ 50Hz
P
National Differences / Deviations for Luxembourg
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
National Differences / Deviations for Netherlands
ZA
ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN 60335-1,
EN 60335-2-40)
—
25.6 Plugs according to standard sheet C3b not allowed
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A