Instruction manual

Page 2 of 14
Report No. 255837
IEC60335_1S – ATTACHMENT 2
Clause Requirement - Test Result - Remark Verdict
Where the relevant standard for lampholders and
starterholders specifies gauging and
interchangeability requirements at elevated
temperatures, the temperature measured during the
tests of Clause 11 are used
No such components.
P
24.1.7 If the remote operation of the appliance is via a
telecommunication network, the relevant standards
for the telecommunication interface circuitry in the
appliance are EN 41003 and EN 60950-1:2006,
subclause 6.3
No such remote operation.
N/A
25.6 Supply cords of single-phase portable appliances having a rated current not
exceeding 16 A, fitted with a plug complying with the following standard sheets of
IEC 60083:1975:
—
- for Class I appliances:
standard sheet C2b, C3b or C4 ............................. :
Stationary/ Fixed appliance. N/A
- for Class II appliances:
standard sheet C5 or C6 ....................................... :
N/A
25.7 Rubber sheathed cords (60245 IEC 53) are not
suitable for appliances intended to be used
outdoors or when they are liable to be exposed to
significant amount of ultraviolet radiation
N/A
Additional type of supply cord: —
- ordinary polychloroprene sheathed flexible cord
(60245 IEC 57)
1. Not checked in this test
report.
2. The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
Supply cords having high flexibility, not lighter than: —
- rubber insulated and sheathed cord
(60245 IEC 86)
N/A
- rubber insulated, cross-linked PVC sheathed cord
(60245 IEC 87)
N/A
- cross-linked PVC insulated and sheathed cord
(60245 IEC 88)
N/A
Halogen-free thermoplastic compound sheathed supply cords have properties at
least those of:
N/A
- halogen-free thermoplastic compound sheathed
cords (H03Z1Z1H2-F, H03Z1Z1-F), for appliances
having a mass not exceeding 3 kg
N/A