Instruction manual

Page 4 of 14
Report No. 255837
IEC60335_1S – ATTACHMENT 2
Clause Requirement - Test Result - Remark Verdict
ZA ANNEX ZA (NORMATIVE), SPECIAL NATIONAL CONDITIONS (EN)
—
Denmark
—
7.12 Requirements regarding marking tag of power
supply cord and connection of earthing wire for
class I appliances delivered without a plug
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
Norway
—
19.5 The test is also applicable to appliances intended to
be permanently connected to fixed wiring
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
France and Norway
—
22.2 The second paragraph of this subclause, dealing
with single-phase, permanently connected class I
appliances having heating elements, is not
applicable due to the supply system
No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A
Belgium, France, Spain and United Kingdom
—
25.6 Plugs according to standard sheet C2b not allowed No plugs.
The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
N/A