Instruction manual

Page 12 of 14
Report No. 255837
IEC60335_1S – ATTACHMENT 2
Clause Requirement - Test Result - Remark Verdict
22.ZE.3 Appliances designed in such a way that incorrect
mounting is avoided, if this can lead to an unsafe
situation
N/A
If this is not possible, information on the correct
mounting is given directly on the part and/or the
enclosure
N/A
22.ZE.4 Where the weight, size or shape prevents
appliances from being moved manually, they are
fitted with attachments for lifting gear, or
P
so designed that they can be fitted with such
attachments, or
P
be shaped in such a way that standard lifting gear
can easily be used
N/A
Appliances to be moved manually are constructed
or equipped so that they can be moved easily and
safely
N/A
22.ZE.5 The fixing systems of fixed guards which prevent
access to dangerous moving transmission parts
only removable with the use of tools
P
If such guards have to be removed frequently their
fixing systems remain attached to the fixed guards
or to the machine after removal
P
Where possible, guards are incapable of remaining
in place without their fixings
N/A
This does not apply if, after removal of the screws,
or if the component is incorrectly repositioned, the
appliance becomes inoperative
P
If movable guards are interlocked, the interlocking
devices prevent the start of hazardous appliance
functions until the guards are fixed in their position,
and give a stop command whenever they are no
longer closed
P
Where it is possible for an operator to reach the danger zone before the risk due to
hazardous appliance functions has ceased, movable guards associated with a
guard locking device in addition to an interlocking device that:
—
- prevents the start of hazardous appliance
functions until the guard is closed and locked, and
P
- keeps the guard closed and locked until the risk of
injury from the hazardous appliance functions has
ceased
P