Instruction manual

Page 16 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement Test Result Verdict
7.6 Correct symbols used
Correct symbols are used. P
Flammable refrigerant, warning symbol B.3.2 of
ISO 3864, including colour and format, permanently
placed on appliance. Perpendicular height of triangle
containing
"Caution, risk of fire"
symbol be at least 30 mm (IEC 60335-2-40/A1)
Intended for the use of a non-
flammable refrigerant.
N/A
Flammable refrigerant, symbol requiring reference to
manual [0790 of ISO 7000], including colour and
format, permanently placed on appliance
(IEC 60335-2-40/A1 corr.1)
N/A
7.7
Connection diagram fixed to appliances to be
connected to more than two supply conductors and
appliances for multiple supply
Indicated by letters;
1(L), 2(N)
Considered as correct mode of
connection.
N/A
7.8
Except for type Z attachment, terminals for connection to the supply mains indicated
as follows:
- marking of terminals exclusively for the neutral
conductor (N)
N/A
- marking of protective earthing terminals
(symbol 5019 of IEC 60417)
Protective earthing terminal is
provided.
P
- marking not placed on removable parts
No marking on removable
parts.
N/A
7.9
Marking or placing of switches which may cause a
hazard
No hazard. N/A
7.10
Indications of switches on stationary appliances and
controls on all appliances by use of figures, letters or
other visual means ................................................... :
With visual means for indoor
unit.
On LED display:
P
The figure 0 indicates only OFF position, unless no
confusion with the OFF position
For address setting of
communication between the
indoor unit and outdoor unit.
P
7.11 Indication for direction of adjustment of controls
P
7.12 Instructions for safe use provided
Provided with user/ installation
manual.
P
Appliances not accessible to general public,
classification of clause 6.101 included
(IEC 60335-2-40)
Not accessible to the general
public.
Described on installation
manual.
P
Appliances using flammable refrigerants, an
installation, service and operation manual, either
separate or combined manuals, provided and
include information given in annex DD
(IEC 60335-2-40/A1)
Intended for the use of a non-
flammable refrigerant.
N/A