Instruction manual

Page 18 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement – Test Result Verdict
7.12.2
Stationary appliances not fitted with means for
disconnection from the supply mains having a
contact separation in all poles that provide full
disconnection under overvoltage category III, the
instructions state that means for disconnection must
be incorporated in the fixed wiring in accordance
with the wiring rules
N/A
7.12.3
Insulation of the fixed wiring in contact with parts
exceeding 50 K during clause 11; instructions stating
that the fixed wiring must be protected
N/A
7.12.4 Instructions for built-in appliances: —
- dimensions of space
Built-in duct type. P
- dimensions and position of supporting means
P
- distances between parts and surrounding structure
P
- dimensions of ventilation openings and
arrangement
P
- connection to supply mains and interconnection of
separate components
P
- allow disconnection of the appliance after
installation, by accessible plug or a switch in the
fixed wiring, unless (IEC 60335-1/A1)
Not checked in this test report. N/A
a switch complying with 24.3 (IEC 60335-1/A1)
Not checked in this test report. N/A
The disconnection may be achieved by having the
plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules
(IEC 60335-1/A1)
Not checked in this test report. N/A
7.12.5
Replacement cord instructions, type X attachment
with a specially prepared cord
N/A
Replacement cord instructions, type Y attachment
Type Y attachment. P
Replacement cord instructions, type Z attachment
N/A
7.12.6
Caution in the instructions for heating appliances
with a non-self resetting thermal cut-out
(IEC 60335-1/A1)
Not a heating appliance. N/A
7.12.7
Instructions for fixed appliances stating how the
appliance is to be fixed (IEC 60335-1/A1)
P
7.12.8 Instructions for appliances connected to the water mains (IEC 60335-1/A1): —
- max. inlet water pressure (Pa) (IEC 60335-1/A1) . :
Not intended to be connected
to the water mains.
N/A
- min. inlet water pressure, if necessary (Pa)
(IEC 60335-1/A1) ................................................... :
N/A
Instructions concerning new and old hose-sets for
appliances connected to the water mains by
detachable hose-sets (IEC 60335-1/A1)
N/A