Instruction manual

Page 19 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement – Test Result Verdict
7.13 Instructions and other texts in an official language
In English. P
7.14 Marking clearly legible and durable
Legible. No curling.
No damage.
P
7.15 Marking on a main part
Marked on the main part. P
Marking clearly discernible from the outside, if
necessary after removal of a cover
Clearly discernible. P
For portable appliances, cover can be removed or
opened without a tool
N/A
For stationary appliances, name, trademark or
identification mark and model or type reference
visible after installation
P
For fixed appliances, name, trademark or
identification mark and model or type reference
visible after installation according to the instructions
P
Indications for switches and controls placed on or
near the components. Marking not on parts which
can be positioned or repositioned in such a way that
the marking is misleading
P
Marking on panel allowed, provided panel in place
for intended operation of appliance (IEC 60335-2-40)
P
7.16
Marking of a possible replaceable thermal link or
fuse link clearly visible with regard to replacing the
link
Clearly visible. P
7.101 Marking of fuses and overload protective devices, if replaceable (IEC 60335-2-40): —
- fuse rated current in amperes, type and rated
voltage or (IEC 60335-2-40)
Not intended to be replaceable
by the user. Shall be replaced
by any qualified personnel.
N/A
- manufacturer and model of overload protective
device (IEC 60335-2-40)
N/A
7.102
Marking for connection with aluminium wire, if
necessary (IEC 60335-2-40)
No aluminium wire. N/A
8 PROTECTION AGAINST ACCESS TO LIVE PARTS
—
8.1
Adequate protection against accidental contact with
live parts
Adequately protected. P
8.1.1
Requirement applies for all positions, detachable
parts removed
Adequately protected. P
Insertion or removal of lamps, protection against
contact with live parts of the lamp cap
No lamps. N/A
Use of test probe B of IEC 61032: no contact with
live parts
No contacts. P