Instruction manual

Page 48 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement – Test Result Verdict
Conductors not moved more than 1 mm in terminals
N/A
25.17
Adequate cord anchorages for type Y and Z
attachment
Type Y attachment. P
25.18
Cord anchorages only accessible with the aid of a
tool, or
Accessible with a tool only. P
so constructed that the cord can only be fitted with
the aid of a tool
P
25.19
Type X attachment, glands not used as cord
anchorage in portable appliances
Type Y attachment. N/A
Tying the cord into a knot or tying the cord with string
not used
N/A
25.20
Conductors of the supply cord for type Y and Z
attachment adequately additionally insulated
Type Y attachment. P
25.21
Space for supply cord for type X attachment or for
connection of fixed wiring constructed to permit
checking of conductors with respect to correct
positioning and connection before fitting any cover,
no risk of damage to the conductors when fitting the
cover, no contact with accessible metal parts if a
conductor becomes loose, etc.
Type Y attachment. N/A
For portable appliances, the uninsulated end of a
conductor prevented from any contact with
accessible metal parts, unless the end of the cord is
such that the conductors are unlikely to slip free
Stationary appliance. N/A
25.23
Interconnection cords comply with the requirements
for the supply cord, except as specified
1. Not checked in this test
report.
2. The manufacturer, service
agent or similarly qualified
person shall use a proper
cross sectional area of supply
cord and interconnection cord
referring to an installation
manual.
P
If necessary, electric strength test of clause 16.3
N/A
25.24
Interconnection cords not detachable without the aid
of a tool if compliance with the standard is impaired
when they are disconnected
Detachable with a tool only. P
25.25
Dimensions of pins compatible with the dimensions
of the relevant socket-outlet. Dimensions of pins and
engagement face in accordance with the relevant
plug in IEC 60083
N/A
26 TERMINALS FOR EXTERNAL CONDUCTORS
—
26.1
Appliances provided with terminals or equally
effective devices for connection of external
conductors
P