Instruction manual

Page 63 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement – Test Result Verdict
4.18 Active flammability test —
This subclause is applicable
N/A
G
ANNEX G (NORMATIVE)
SAFETY ISOLATING TRANSFORMERS
—
The following modifications to this standard are applicable for safety isolating
transformers:
—
7 Marking and instructions —
7.1 Transformers for specific use marked with: —
- name, trademark or identification mark of the
manufacturer or responsible vendor
N/A
- model or type reference
N/A
17 Overload protection of transformers and associated circuits —
Fail-safe transformers comply with subclause 15.5 of
IEC 61558-1
N/A
22 Construction —
Subclauses 19.1 and 19.1.2 of IEC 61558-2-6 are
applicable
N/A
29 Clearances, creepage distances and solid insulation —
29.1, 29.2
and 29.3
The distances specified in items 2a, 2c and 3 in
table 13 of IEC 61558-1 apply
N/A
H
ANNEX H (NORMATIVE)
SWITCHES
—
Switches comply with the following clauses of IEC 61058-1, as modified: —
- The tests of IEC 61058-1 carried out under the
conditions occurring in the appliance
N/A
- Before being tested, switches are operated
20 times without load
N/A
8 Marking and documentation —
Switches are not required to be marked
N/A
However, switches that can be tested separately
from the appliance marked with the manufacturer’s
name or trade mark and the type reference
N/A
13 Mechanism —
The tests may be carried out on a separate sample
N/A
15 Insulation resistance and dielectric strength —
15.1 Not applicable
N/A
15.2 Not applicable
N/A