Instruction manual

Page 70 of 100 Report No. 255837
TRF No. IEC60335_2_40F
IEC 60335-2-40
Clause Requirement – Test Result Verdict
DD.14 Recovery (IEC 60335-2-40/A1)
N/A
EE
ANNEX EE (NORMATIVE) (IEC 60335-2-40/A1)
PRESSURE TESTS
—
EE.1 General (IEC 60335-2-40/A1)
Test location:
Considered heat exchangers of
indoor unit.
Test result:
No leakage. No hazard.
P
EE.2
Pressure test value determined under testing carried
out in clause 11 (IEC 60335-2-40/A1)
N/A
EE.3
Pressure test value determined under testing carried
out in clause 19 (IEC 60335-2-40/A1)
N/A
EE.4
Pressure test value determined under testing carried
out under standstill conditions (IEC 60335-2-40/A1)
N/A
EE.5
Fatigue test option for Clauses EE.1 and EE.4.1
(IEC 60335-2-40/A1)
Rated compressive strength:
15,2 MPa
Measured compressive
strength: 16,5 MPa
250 000 cycles.
P
FF
ANNEX FF (NORMATIVE) (IEC 60335-2-40/A1)
LEAK SIMULATION TESTS
—
FF.1 General (IEC 60335-2-40/A1)
Intended for the use of a non-
flammable refrigerant.
N/A
FF.2 Test methods (IEC 60335-2-40/A1 corr.1)
N/A
GG
ANNEX GG (NORMATIVE) (IEC 60335-2-40/A1)
CHARGE LIMITS, VENTILATION REQUIREMENTS AND REQUIREMENTS FOR
SECONDARY CIRCUITS
—
GG.1
Requirements for charge limits in ventilated areas
(IEC 60335-2-40/A1 Corr.1)
Intended for the use of a non-
flammable refrigerant.
N/A
GG.2
Requirements for charge limits in unventilated areas
(IEC 60335-2-40/A1 Corr.1)
N/A
GG.3
Requirements for charge limits in areas with
mechanical ventilation (IEC 60335-2-40/A1)
N/A
GG.4
Requirements for mechanical ventilation within the
appliance enclosure (IEC 60335-2-40/A1)
N/A
GG.5
Requirements for mechanical ventilation for rooms
complying with ISO 5149 (IEC 60335-2-40/A1)
N/A
GG.6
Requirements for refrigeration systems employing
secondary heat exchangers
(IEC 60335-2-40/A1 Corr.1)
N/A