User Manual

Pull out the Air filter.

Detach the front grille.



Remove the safety clip from panel front. (There are

two safety clips between grille and panel base.)

 If you want to clean the filter only, you do not have to

detach the grille. Follow step 4 and 5

Open the front grille.



Pull both hooks and take the grille downward. Two

safety clips are mounted to the front grille to prevent it

from dropping.

Insert the Air filter back in its original position.



You will hear a click sound when the Air filter is

properly placed.

Attach the front grille.



Reverse the above steps to attach the front grille.

Clean the grille and Air filter with a vacuum cleaner

or soft brush. If dust is too heavy, then rinse it with

running water and dry it in a ventilated area.



For best conditions, repeat every two weeks.



If the Air filter dries in a confined (or humid) area, odors

may generate. If it occurs, re-clean and dry it in a

well-ventilated area.

Cleaning air lter and grille

Cleaning and maintaining the air conditioner

• Theillustrationshownabovemaydierfromyoursdependingonyourmodel.

• Aftercleaningthelter,presstheFilter Reset button on the remote control for 2 seconds to reset the lter

schedule. Filter sign indicator will be on for cleaning time.

• Iftheangleontheairowbladeshasbeenchangedbyuserduetoopeningthefrontgrilleforinstallationor

maintenance, you must turn o the circuit breaker and turn it on again before using the air conditioner.

Otherwise, angles of the each angle can be dierent or some of the blade may not close when the product is o.

NOTE

PULL