User Manual

AA
24
Setting an indoor unit address and installation option
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Individual control of
a remote controller
Heating setting
compensation
EEV Step of stopped
unit during oil return/
defrost mode
Motion detect sensor -
Remote
Controller
Display
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
3
0 or 1 channel 1 0 Disuse 0
Default
value
0 Disuse
1
Turn out in 30min.
without motion
2 channel 2 1 2°C
1
Oil return
or Noise
decreasing
in defrost
mode
2
Turn out in 60min.
without motion
3 channel 3
2 5°C
3
Turn out in 120min.
without motion
4 channel 4
4
Turn out in 180min.
without motion
5
Turn out in 30min.
without motion
or *advanced
function
6
Turn out in 60min.
without motion
or *advanced
function
7
Turn out in 120min.
without motion
or *advanced
function
8
Turn out in 180min.
without motion
or *advanced
function
* Advanced function: Controlling cooling/heating current or power saving with motion detect.
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 5
Use of Auto Change Over
for HR only in Auto mode
(When setting SEG3)
Standard heating temp.
Oset
(When setting SEG3)
Standard cooling temp.
Oset
(When setting SEG3)
Standard for mode change
Heating → Cooling
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1
(When setting SEG3)
Standard for mode change
Cooling → Heating
(When setting SEG3)
Time required for mode
change
Compensation option for
Long pipe or height
dierence between
indoor units
- -
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 - - - - -
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3 - - - - -
 05 series installation option