User`s manual

Removing Excess Humidity
E-18
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
The fan speed is selected automatically( : Automatic).
4
To control the direction of the air flow, refer to page 20.
5
To adjust the temperature, press the buttons one or more times until the
required temperature is displayed. Possible temperatures are between
65
O
F(18°C) and 86
O
F(30°C) inclusive.
Result:
◆ Each time you press the buttons:
- The temperature is adjusted by 1
O
F(1°C).
- The indoor unit beeps.
◆ The air conditioner starts removing the excess humidity;
◆ the quantity of air is adjusted automatically.
3
1
If necessary, press the (On/Off) button.
Result:
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
IMPORTANT
If the is not displayed on the control panel, press the button on the
remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press the button.
◆ The air conditioner runs in the Dry mode.
2
You can change modes at any time.
N
N
o
o
t
t
e
e
APV48QOAN_E IB_00000 2008.10.20 11:3 PM Page 18