Contents PREPARATION Safety Precautions ......................................................................................................... Name of Each Part ......................................................................................................... Remote Control – Buttons and Display ............................................................... Inserting the Remote Control Batteries ............................................................... Getting Started ..........
Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions are provided to protect the users’ safety and prevent property damage. Make sure to read the followings and use the air conditioner properly. Keep this user’s manual together with the installation manual in a handy place so that you can find it whenever you need to see it after reading this manual thoroughly. WARNING This indicates the possibility of serious injury or death.
WARNING DURING OPERATION Do not attempt to repair, move, modify or reinstall the unit on your own. Make sure that these installations are carried out by qualified personnel to avoid electric shock or fire. When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center.
WARNING DISPOSING THE UNIT Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of Please recycle or dispose Install the outdoor unit so as Install the drain hose to let the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin, causing injury. Releasing refrigerant into the atmosphere also damages the environments.
CAUTION REGARDING POWER SOURCE Disconnect the circuit breaker Contact the service center or Contact the service center Do not open the front grille Avoid cold and hot air Avoid the water from Do not use the air conditioner Do not step on the air Do not drink the water from when you don’t use the air conditioner for a long time to save energy. manufacturer if you want to repair the air conditioner.
CAUTION DURING OPERATION Do not touch the pipes connected to the air conditioner. Do not use the air conditioner Do not give excessive shock The appliance is not intended The maximum input power & Do not clean the air The surface of the heat Dispose of the packaging All of the manufacturing and to maintain the machine, food, pet, plant or cosmetics. to the air conditioner. OTHERS Be sure that the air filter not to be exposed to direct sunlight.
Name of Each Part The design and shape can be changed according to the model. Indoor Unit Air Inlet Room Temperature sensor Power(On/Off) button Air filter (under the panel) Airflow blade (outlet) mode indicator Timer/ mode indicator Auto cleaning indicator Set temperature & room temperature AQVWC Series Operation indicator (Auto, Cool, Dry, Fan, Heat) AQVBC Series AQVSC Series E-8 08'VIVACE_CIS_28587A_IB_E.
Outdoor Unit AQ09VSeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) Outdoor Unit AQ12VSeries Air Inlet (Rear) or Air Outlet Connection Valve (Inside) Outdoor Unit AQ18/24VSeries Air Inlet (Rear) Air Outlet Connection Valve (Inside) E-9 08'VIVACE_CIS_28587A_IB_E.
Remote Control-Buttons and Display Airflow direction indicator Operating mode indicator (Auto, Cool, Dry, Fan, Heat) Temperature setting mode indicator Turbo function indicator Fan speed indicator Energy saving indicator Remote control transmission indicator Off Timer indicator Battery life indicator mode indicator On Timer indicator Power (On/Off) button Temperature adjustment buttons Mode selection button (Auto, Cool, Dry, Fan, Heat) Swing button Fan speed adjustment button Digital On/Off butto
Getting Started The User’s Manual provides you with valuable information about your air conditioner. In order to take full advantage of the air conditioner’s features, please read this manual carefully before using. You have already seen the basic description of the unit on pages from 8 to 10. Starting with the next page, you will find a series of step-by-step procedures for each function available.
Selecting Auto Mode You can select Auto mode if you want to cool or heat your room automatically. You can adjust the temperature in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Auto is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Auto mode.
Selecting Cool Mode You can select Cool mode if you want to cool your room. You can adjust the temperature and the fan speed when cooling. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Cool is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Cool mode.
Selecting Heat Mode You can select Heat mode if you want to heat your room. You can adjust the temperature and the fan speed when heating. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Heat is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Heat mode.
Selecting Dry Mode Select Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Dry is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode.
Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button on the remote control until Fan is displayed. The indoor unit beeps each time you press the button. The air conditioner runs in Fan mode.
Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 Press the Result: 2 button. Press the Result: The indoor unit beeps. The air conditioner runs in the Energy saving function. The outer airflow blade moves up and down. The airflow direction indicator is displayed automatically. again.
Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on or off in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select cool or heat mode.
Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the three stages; Falling asleep, Sound sleep, and Waking up from mode, and then the air conditioner will automatically turn off when the set time has elapsed. prevents you from having difficulty sleeping on extremely hot/cold nights.
Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs. By adjusting the airflow direction, the efficiency of the air conditioner can be increased. Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically.
Selecting the Auto Cleaning Function Auto cleaning function offers inside air conditioner dry to prevent mold growth. This feature allows you to use the air conditioner more clean and fresh air. 1 Press the Remote Control button. When the air conditioner is turned off, The indicator on the indoor unit display appears and the Auto cleaning function runs.
Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the 2 Press the or buttons until the desired time is displayed to set the On Timer. You can set the time between 0.5 hour and 24 hours. 3 Press the Result: 4 button . button to complete the setting. The remaining time is displayed. The timer indicator stops blinking.
Setting the Off Timer You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the 2 Press the or buttons until the desired time is displayed to set the Off Timer. You can set the time between 0.5 hour and 24 hours. 3 Press the button . button to complete the setting. Result: The remaining time is displayed. The timer indicator stops blinking.
Operating Your Air Conditioner Without the Remote Control You can operate your air conditioner directly without the remote control. 1 2 To turn the air conditioner on, press the ON/OFF switch on the right side of the indoor unit. Result: The Operation indicator on the indoor unit lights up. The indoor unit beeps. The air conditioner starts up in the appropriate mode for the room temperature.
Cleaning Air Filter on Your Air Conditioner For the best use of your air conditioner, you must clean it every 2 weeks regularly to remove the dust that accumulates on the air filter. CAUTION Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. 1 Open the front panel by pulling tabs on the lower right and left sides of the indoor unit. 2 Detach the front panel by pulling it forwards.
Cleaning Deodorizing and Bio filter (Option) To remove minute dust particles and odors, deodorizing and Bio filter are installed in the air conditioner. You should clean the filters every 3 months. 1 Open the upper front grille by pulling the lower right and left tabs of the grille. 2 Pull out the deodorizing and Bio filter. Deodorizing Filter 3 Wash the filters with clean water, then dry them in the shade. 4 Insert the filters into the original position.
Temperature and Humidity Ranges If you check the following tables, you can use your air conditioner more efficiently. If the air conditioner is used at... Then... Heating capacity The air conditioner may stop operating for the reason of protection. Low temperatures Water may leak and some malfunction may occur if the heat exchanger freezes. Protection mechanism Water may condense and drip from the surface of the indoor unit if you don’t use the air conditioner for an extended period of time.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not operate at all. Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. Check if Off Timer is set. The temperature is not adjusted. Check if you selected the Fan mode. The air conditioner does not operate in the HEAT mode.
Installation and maintenance Air conditioners are technically complex products that require regular maintenance. Failure to heed to these requirements and Operation Recommendations could result in reduction of product life span as well as breakdowns of expensive parts. INSTALLATION* It is recommended to perform installation works by organizations with certified state licenses and Samsung certificate.
Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung product, contact the SAMSUNG customer care center. Country RUSSIA KAZAHSTAN UZBEKISTAN KYRGYZSTAN UKRAINE LITHUANIA LATVIA ESTONIA Customer Care Center 8-800-555-55-55 8-10-800-500-55-500 8-800-120-0-400 00-800-500-55-500 8-800-502-0000 8-800-77777 800-7267 800-7267 Web Site www.samsung.ru www.samsung.kz www.samsung.uz – www.samsung.ua www.samsung.lt www.samsung.com/lv www.samsung.ee C Samsung Electronics Co., Ltd.
USER’S MANUAL AQ09V Series AQ12V Series AQ18V Series AQ24V Series Split - type Air Conditioner (Cooling and Heating) E R DB98-28587A(2) 08'VIVACE_CIS_28587A_IB_E.
