User Manual

E-17
Selecting the Energy Saving Function
You can select the Energy Saving Function to save energy when cooling.
The temperature range decreases in order to perform this function.
1
Press the (On/Off) button.
Result
:  The operation indicator on the indoor unit lights up.
 The air conditioner starts up in the mode you selected last.
 The indoor unit beeps.
2
Press the
button.
Result
:  The indoor unit beeps.
 The air conditioner runs in the Energy saving function.
 The outer airflow blade moves up and down.
 The airflow direction indicator is displayed automatically.
 To stop the Energy saving function, press the
again.
Note You can select the Energy saving function only in Cool mode.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 26°C and 30°C.
Note If you want to adjust temperature under 26°C, cancel the Energy
saving function before adjusting the temperature.
4
Press the
to select the fan speed until the required setting is displayed.
Auto  Low  Medium  High
Result
: Each time you press the button, the indoor unit beeps.
5
To control the airflow direction, refer to page 20.
08'VIVACE_CIS_28587A_IB_E.indd 17 2007-12-18 11:07:13