User Manual
E-18
Selecting Mode
mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The
mode can be
selected only when the air conditioner is switched on or off in cool/heat mode.
1
Press the (On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button to select cool or heat mode.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in cool or heat mode.
3
Press the
button.
Result
:
The timer indicator is displayed.
The Off timer is blinking on the remote control.
4
To set the Off timer, press the
buttons once or more times
until the required Off time is displayed.
Result
:
The mode will be automatically stopped in
8 hours if the operation time is not set.
You can set the Off timer by pressing the
buttons to
turn off the
mode automatically at the
appointed time within a range of 30 minutes to 12 hours.
Each time the
buttons are pressed, the time is
increased by 30 minutes or 1 hour.
mode will be
stopped at the appointed off time.
5
Press the
button.
Result
:
The remaining time is displayed.
Note
In the case of selecting mode or adjusting the extra
time for
mode, you should press the
button
within 10 seconds. If you do not press the
button within
10 seconds,
mode will be canceled automatically.
6
Press the
button to adjust the temperature until the desired
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the
button;
- The temperature adjusts by 1°C
- The indoor unit beeps
Temperature changes in mode
To prevent excessive cooling/heating during sleep, the mode automatically modifies
the temperature setting in accordance with the time setting. Temperature and air current change
according to the three stages; Falling asleep, Sound sleep, and Waking up from mode,
and then the air conditioner will automatically turn off when the set time has elapsed.
Three stage
prevents you from having difficulty sleeping on extremely hot/cold nights.
Falling asleep : Eases you into sleep by dropping the temperature.
Sound sleep : Relaxes your body and raises your temperature slightly.
Waking up from mode :
Allows you to wake up to comfortable crisp air making you feel refreshed and energized.
• Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the
mode is set for too short or too long a time because the temperature changes are
set to an 8-hour cycle.
• If the mode is set for less than 4 hours, the operation will stop at the set time.
If the mode is set for over 5 hours, the last hour will run in Waking Up stage before
shutting off.
• Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for
heating.
Cool mode
Heat mode
To deactivate mode
1. Press the Set/Cancel button on the remote control.
mode shuts off and the indicator will disappear.
08'VIVACE_CIS_28587A_IB_E.indd 18 2007-12-18 11:07:18