User Manual

E-24
Operating Your Air Conditioner Without the Remote Control
Selecting Mode
You can operate your air conditioner directly without the remote control.
1
To turn the air conditioner on, press the ON/OFF switch on the right
side of the indoor unit.
Result:
 The Operation indicator on the indoor unit lights up.
 The indoor unit beeps.
 The air conditioner starts up in the appropriate mode for the
room temperature. The air conditioner changes the Cool or
Heat mode automatically depending on the current
temperature during operation.
Room Temperature Operating Mode
Lower than 24°C Heating
Higher than 24°C Cooling
2
To turn the air conditioner off, press the On/Off button again.
Note Even if you turned the air conditioner on with the On/Off button,
you can control it with the remote control.
The mode creates strong purified zone by decomposing harmful
particles in the behavior of active hydrogen(H) and oxygen ion(O₂).
The
mode can be selected whether the air conditioner is turned on or not.
1
Press the button.
 The air conditioner starts up in -Auto mode automatically.
 The mode also runs when the air conditioner is turned on.
 By pressing the button again, the mode is canceled.
2
Press the to select the operation types.
 Whenever press the button, Auto, Silence and Rapid will appear
repeatedly.
 Auto: Controls the fan speed automatically
Silence: Purifies the indoor air with silence
Rapid: Purifies the indoor air quickly
Note  If mode is turned on when the air conditioner runs,
- You cannot select the
operation types by pressing
the
button. The mode runs only in Auto.
- The mode will also stop by pressing the Power button of
the panel.
 : Micro Plasma Ion
08'VIVACE_CIS_28587A_IB_E.indd 24 2007-12-18 11:07:49