OWNER'S INSTRUCTIONS AW05NCM7 AW06NCM7 Window-type Room Air Conditioner (Cooling) E S DB98-26609A DB98-26609A.
Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. Risk of electric shock. • Can cause injury or death. • Disconnect all remote electric power supplies before servicing, installing or cleaning. • This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard.
Contents PREPARING YOUR AIR CONDITIONER Safety Precautions ........................................................................................ Description of Each Component ................................................................... 2 4 Getting Started .............................................................................................. 5 OPERATING YOUR AIR CONDITIONER Cooling Your Room ..............................................................
Description of Each Component The design and shape are subject to change. Air inlet (Outside) Inner air flow blades (right/left orientation) Air outlet Air inlet (Inside) Air inlet (Outside) Air filter (Inside) Power plug (The type of the power plug may differ, depending on the local power supply). Power Control selector Thermostat Dial Fan Mode selector CAUTION If the Reset button of the power plug operates, the air conditioner starts cooling operation after 2~3 minutes. E- DB98-26609A.
Getting Started You have just purchased a Samsung window-type Room Air Conditioner which should be installed following your Owner's Instructions. Your Owner's Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's features. The illustrations in the step-by-step procedures use four different symbols: PRESS PUSH IMPORTANT NOTE E- DB98-26609A.
Cooling Your Room You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when Cooling 1 To switch the unit on, simply press the Power Control selector to the "On" position. Result: 2 The air conditioner starts operating. Turn the Thermostat dial and set it to " 1 ~ 10 ". Possible temperatures: Can be set between 64 °F and 84°F . Result: The air conditioner starts cooling if the room temperature is higher than the selected temperature.
Switching the Air Conditioner Off You can switch the air conditioner off whenever you want. To switch the unit off, simply press the Power Control selector to the "Off" position. Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Adjust the air flow blades to the desired position by pushing them side to side. E- DB98-26609A.
Power Failure If a power failure occurs, the air conditioner is switched off. When the power comes back on, the air conditioner will start up automatically. Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges that the air conditioner can be used at. Mode Indoor Temperature Outdoor Temperature Indoor Humidity Cooling 70°F to 90°F approx. 70°F to 110°F approx. 80% or less If the air conditioner is used at... Then...
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to keep the air conditioner operating at optimum level. When cleaning the air conditioner, turn it off and pull out the power plug. 1 Open the front grille by pulling the tabs on both sides of the grille. Then lift it up slightly to open the front grille completely. 2 Grab the tabs on the filter and pull it up and out. 3 Remove all dust on the air filter with a vacuum cleaner or brush.
Solving Common Problems Before contacting an Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation/Solution The air conditioner does not Check for a power failure. operate at all Check the voltage. (See the technical specifications). Check the power plug for disconnection. Check to see whether the Power Control selector is placed in the "OFF" position. (Set it to the desired position).
Technical Specifications Design and specifications are subject to change without notice. Model AW05NCM7 AW06NCM7 Power Supply 115V ~ , 60 Hz E-11 DB98-26609A.
INSTALLATION MANUAL Window-Type room air conditioner DB98-26609A.
INTRODUCTION NTRODUCTION This brief procedure guide was prepared to supplement the user manual in helping correctly install your room air conditioner. You should consider seeking a professional installation specialist if you are unsure of installing the air conditioner after reading this supplement. The weight and size of the unit may make it too difficult for you to install by yourself. If you feel you can install the air conditioner, this guide will assist you towards a safe installation.
G ETTING STARTED Preparation for Installation Always have an assistant to help you. Never attempt to install any air conditioner alone. You risk the possibility of hurting yourself or injuring others by attempting to install it alone. Checkpoints Prior to Installation 1 Carefully remove the unit from the packing case, lay it on the floor and check that all accessories (as indicated on page 16) are enclosed. 2 Check the cabinet and front grille of the unit for any defects such as scratches.
Window Type Requirements A standard double-hung window with actual opening width of "X." The installation will need to be modified for windows other than the standard double hung type. Clear vertical opening of "Y" minimum, from bottom of sash to sill. Install the air conditioner in a window where there will be enough clearance around the cabinet to allow ample circulation of air through the unit. All supporting parts should be secured to firm wood, masonry, or metal.
Type A(Qty-6) Type B(Qty-9) Type C(Qty-2) Window filler panel 1 1 Remove the backing from the top support channel seal strip and attach it to the bottom of the top support channel. 2 2 Install the top support channel with three Type B screws provided. The screw holes are of larger gauge on the channel and smaller on the cabinet. The top support channel is "L" shaped. The high side of the channel must always face inwards. 3 3 4 4 Assemble the window brackets on the cabinet.
5 6 7 Attach the seal strip to the window. 5-1 Cut the adhesive-backed foam seal strip gasket to the window width. 5-2 Remove the backing from the seal strip and attach the strip to the underside of the bottom window. Install the unit in the window. 6-1 Place the air conditioner cabinet into the window with the top support channel positioned just in front of the bottom sash.
8 Install the window gasket. Cut the foam window gasket to the window width and stuff it between the window and the glass to prevent air and insects from getting into the room. 9 Check for air leaks and seal. 10 Plug in the power cord on the air conditioner. Turn the air conditioner on and operate it in Cool mode and check for unusual vibrations. After several minutes, the unit will blow out cold air. If the unit is not cold, please return it to the dealer. E-18 DB98-26609A.
If you need to remove the front grille for replacement, follw the steps below. 1 Open the front grille by pulling the tabs on both sides of the grille. Then lift it up slightly to open the front grille completely. 2 Remove the screw that holds the grille in place. Remove the shipping tape before pulling out the air filter, if necessary. 3 4 Disassemble the front grille. 3-1 Press both sides of the cabinet in the direction of the arrow as shown in the figure.
SAMSUNG ROOM AIR CONDITIONER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
