User Manual

52 53
Auto Update
You can set the Auto Update function so that the product downloads new upgrade
software when it is in Auto Update mode. In Auto Update mode, the product is off,
but its Internet connection is active. This allows the product to download upgrade
software automatically, when you are not using it.
1.
Press the ▲▼ buttons to select Auto Update, and then press the
E
button.
2.
Select "Off" or "On".
●
On : The product will proceed with updating its software automatically if a new
release of the software becomes available without notifying the user.
●
Off : The product will prompt user to confirm updating when a new release
of the software becomes available, which allows user to proceed or cancel
updating.
"
To use the Auto Update Mode Upgrade function, your product must be connected to
the Internet.
Manage Satellite Channels
For BD-H8509S, H8909S model
Manage software downloads via a satellite channel.
Update by USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com.
2.
Click SUPPORT on the top right of the page.
3.
Enter the product's model number into the search field. As you enter the model
number, a drop down will display products that match the model number.
4.
Left click your product's model number in the drop down list.
5.
On the page that appears, scroll down to and then click Firmware Manuals &
Downloads.
6.
Click Firmware in the centre of the page.
7.
Click the ZIP button in the File column on the right side of the page.
8.
Click Send in the first pop-up that appears. Click OK in the second pop-up to
download and save the firmware file to your PC.