BD-P4600 Blu-ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.
key features of your blu-ray disc player Player Features Supports a Variety of Disc Types ~ Blu-ray (BD-ROM, BD-RE, BD-R), DVD Video, DVD-RW/-R (V mode and finalized only) discs and Audio CD. ~ CD-RW/CD-R, DVD-RW/-R and USB memory flash stick content such as MP3, JPEG, DivX, MKV and MP4 files. HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. DivX DivX® is a digital video format created by DivX, Inc.
Menu graphics Support full colour resolution graphics and animation, thereby greatly surpassing the capabilities of DVD-Video. Unlike DVD, Menus can be accessed during video playback. Menu sounds When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice. Interactivity Certain Blu-ray Discs may contain Animated menus and Trivia games.
key features of your blu-ray disc player What’s included Check for the supplied accessories below.
safety information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates “dangerous CAUTION: TO REDUCE THE RISK OF ELECTRIC voltage” inside the product that presents SHOCK, DO NOT REMOVE COVER (OR BACK) NO a risk of electric shock or personal injury. USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
safety information The product unit accompanying this user manual is licenced under certain intellectual property rights of certain third parties. This licence is limited to private non-commercial use by end-user consumers for licenced contents. No rights are granted for commercial use.
Handling Cautions Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. ~ Do not use benzene, thinner, or other solvents for cleaning. ~ Wipe the cabinet with a soft cloth. Restrictions on Playback ~ This player may not respond to all operating commands because some Blu-ray, DVD and CD discs allow specific or limited operation and features during playback. Please note that this is not a defect in the player.
contents key features of your blu-ray disc player 4 What’s included safety information 5 6 Warning Precautions getting started 11 12 16 Before Using the User’s Manual Disc Type and Characteristics Disc Storage & Management description 17 18 Top Panel Bottom Panel remote control 19 20 20 21 Tour of the Remote Control Setting the Remote Control Regarding the Battery Controllable TV Codes connections 22 24 31 32 Installing the Blu-ray Disc Player Connecting to a TV with an HDMI Cable - BEST Q
37 Setting the Clock language setup 38 Setting up the Language Options audio setup 39 Setting up the Audio Options display setup 42 Setting up the Display Options HDMI setup 46 Setting up the HDMI Setup Options parental setup 49 Setting up the Parental Lock network setup 51 Setting up the Network Setup Options pc streaming function 56 Connecting to a Pc and Playing Mp3, Jpeg, Divx, Mkv and Mp4 Content BD data management 59 60 60 System Device Management DivX(R) Registration DivX(R)
contents system upgrade 61 63 63 Firmware Upgrade System Information Firmware Upgrade Notification watching a movie 64 65 66 67 67 68 69 69 Using the Display Function Using the Disc Menu & Popup/Title Menu Repeat Play Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle BONUSVIEW Settings BD-LIVE™ listening to music 70 70 71 Buttons on the Remote Control used for Audio CD (CD-DA)/MP3 playback Repeat Audio CD(CD-DA)/MP3 Playing an Audio CD(CD-DA)/MP3 playing back a
getting started Before Using the User’s Manual Make sure to check the following terms before using the user’s manual. Icons that will be used in this manual h g f Z C V Term BD-ROM Definition This involves a function available on a BD-ROM. BD-RE This involves a function available on a BD-RE. BD-R This involves a function available on a BD-R.
getting started Disc Type and Characteristics Disc types that can be played Disc Types BD-ROM BD-RE/BD-R DVD-VIDEO Disc Logo Recorded content Disc Shape Max. Playing minute AUDIO + VIDEO Single sided Playing time depends on the Title Single sided(12 cm) 240 Double sided(12 cm) 480 AUDIO + VIDEO Single sided(8 cm) 80 Double sided(8 cm) 160 DVD-RW (V mode and finalized only) AUDIO + VIDEO 12 cm (4.7GB) 480 (EX : Extended Play) DVD-R (V mode and finalized only) AUDIO + VIDEO 12 cm (4.
Discs that cannot be played ~ ~ ~ ~ ~ ~ Blu-ray Discs with a region code other than “Region B”. DVD-Video with a region number other than “2” or “ALL” HD DVD DVD+RW/+R DVD-RAM DVD-RW(VR mode) ~ ~ ~ ~ 3.9 GB DVD-R Disc for Authoring. DVD-ROM/PD/MV-Disc, etc Super Audio CD(except CD layer) CVD/CD-ROM/CDV/CD-G/CD-I/LD (CDGs play audio only, not graphics.) Region code Both the Blu-ray Disc Player and the discs are coded by region. These regional codes must match in order to play the disc.
getting started Disc Types ❖ BD-ROM This Blu-ray disc can only be played back. A BD-ROM disc contains pre-recorded data. Although a BDROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format for playback on Blu-ray Disc Player's. This unit can play back pre-recorded commercial BD-ROM discs. ❖ BD-RE/BD-R Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.
Disc Format ❖ DVD-RW/-R (V) ~ This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this Blu-ray Disc Player once it has been finalized. ❖ DivX CD-R/-RW, DVD-R/-RW, USB, PC streaming Video Files with following extensions can be played. : .avi, .divx, .AVI, .DIVX DivX Video (Codec) Format : DivX 3.11 DivX 4.x DivX 5.x (without QPEL and GMC) DivX Audio (Codec) Format : MP3, MPEG1 Audio Layer 2, AC3, DTS Supported subtitle file formats: .smi, .srt, .sub, .psb, .
getting started Disc Storage & Management Disc Handling ❖ Disc Shape ~ Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this Blu-ray Disc Player may be damaged. ❖ Holding discs ~ Avoid touching the surface of a disc where recording is performed. ❖ Blu-ray Discs ~ If the player is not used for a long period of time, remove the Blu-ray Disc from the player and store it in its case.
description TOP Panel ● DESCRIPTION M ` ` ` ` REMOTE CONTROL SENSOR Detects signals from the remote control. DISPLAY Displays the playing status, time, etc. SEARCH/SKIP BUTTONS Goes to the next title/chapter/track or goes back to the previous title/chapter/ track. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. EJECT BUTTON Opens and closes the disc tray. POWER BUTTON Turns the Blu-ray Disc Player on and off. DISC TRAY Opens to accept a disc.
description BOTTOM Panel Fan The fan always revolves when the power is on. M USB HOST A USB memory flash stick can be connected here and used as storage when connected to BD-LIVE. It can also be used for firmware upgrades and MP3/JPEG/DivX/ MKV/MP4 playback, as well as for connecting to BD-LIVE with a wireless LAN adapter. HDMI OUT Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture and to your Receiver for the best quality sound.
remote control Tour of the Remote Control Installing batteries in the Remote Control Lift the cover at the back of the remote control 2. upward as shown. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. EJECT Button To open and close the disc tray. POWER TV POWER EJECT TV POWER Button POWER Button SUBTITLE Button Press this to switch the Blu-ray Disc/DVD’s subtitle language.
remote control Setting the Remote Control You can control certain functions of your TV with this remote control. Control function buttons include : TV POWER, TV CH ,/., TV VOL +/–, TV MUTE, TV SOURCE button. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3.
Controllable TV Codes Brand Code TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09 TV POWER+82 TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18 TV POWER+57 TV POWER+71 TV POWER+73 TV POWER+57 TV POWER+52 TV POWER+75 TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 TV POWER+64 TV POWER+73 TV POWER+06, +49, +57 TV POWER+57 TV POWER+84 TV POWER+70 TV POWER+49, +52, +71 TV POWER+60, +72, +73, +75 TV POWER+52 TV POWER+61, +79 TV POWER+06, +19, +20, +21, +22, +78 TV POWER+06, +69
connections InSTallIng THE Blu-RaY DISc PlaYeR Case 1 : Installing on the stand To install on the Stand, insert the Holder-Stand into the bottom slot of the Blu-ray Disc player and turn the screw clockwise to fix it.
Case 2 : Installing on a wall 1. Insert the Bracket-Set into the bottom slot of the Blu-ray Disc player and turn the two screws clockwise to fix it. When the Bracket-Set is installed, slide and insert the Blu-ray Disc player into the appropriate slots of the Bracket-Wall. For secure installation, slide the bracket to the right after inserting it. M ` Screws for the bracket-wall are not included. Purchase screws appropriate for your type of wall. English _23 ● CONNECTIONS 2.
connections Connecting to a TV with an HDMI Cable - BEST QUALITY (RECOMMENED) 1. Using an HDMI cable (not included), connect the HDMI OUT terminal on the bottom of the Blu-ray Disc Player to the HDMI IN terminal of your TV. 2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on your TV screen.
HDMI Auto Detection Function The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable while power is on (see page 44). M ` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user's manual of your TV. ` If an HDMI cable is connected from the player to a TV, the Blu-ray Disc Player’s output is set to HDMI output resolution automatically within 10 seconds.
connections Connecting to a TV with DVI Cable - BEST QUALITY (RECOMMENED) 1. Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the bottom of the Blu-ray Disc Player to the DVI IN terminal of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the bottom of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV. 3.
Connecting to a TV (Video) - GOOD QUALITY 1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the bottom of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV. 2. Turn on the Blu-ray Disc Player and TV. 3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen.
connections Connecting to an Audio System (HDMI supported Amplifier) - BEST QUALITY (RECOMMENED) 1. Using an HDMI cable (not included), connect the HDMI OUT terminal on the bottom of the Blu-ray Disc Player to the HDMI IN terminal of your Amplifier. 2. Using an HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your TV. 3. Turn on the Blu-ray Disc Player, TV and Amplifier. 4.
Connecting to an Audio System (Dolby Digital, DTS Amplifier) - BETTER QUALITY 1. Using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the bottom of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. 2. Using the video signal cable(s), connect the HDMI or VIDEO OUT terminals on the bottom of the Blu-ray Disc Player to the HDMI or VIDEO IN terminal of your TV. (See pages 24~27) 3. Turn on the Blu-ray Disc Player, TV and Amplifier.
connections Connecting to an Audio System (2 Channel Amplifier) - GOOD QUALITY 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the bottom of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your Amplifier. 2. Using the video signal cable(s), connect the HDMI or VIDEO OUT terminals on the bottom of the Blu-ray Disc Player to the HDMI or VIDEO IN terminal of your TV. (See pages 24~27) 3. Turn on the Blu-ray Disc Player, TV and Amplifier. 4.
Connecting to THE NETWORK To access network service or upgrade the current firmware, you must make one of the following connections. By connecting to a network, you can access the BD-LIVE, YouTube services, PC streaming and Software upgrades from Samsung’s update server. We recommend you use an AP or router for the network. If you don’t have one, you'll need two network providing services to use the PC streaming function. Cable Network To LAN port Connecting using a router (e.g.
connections Wireless Network You can connect to network with a Wireless IP sharer. 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the USB port on the bottom panel of the Blu-ray Disc Player, and set the wireless network options. (See pages 52~54) 2. If your PC supports wireless LAN connection, it can be connected to the router by cable or wirelessly.
basic functions of your blu-ray disc player This section introduces basic playback functions and playback by disc type. After plugging in the player, the first time you press the POWER button, this screen comes up: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off.
basic functions of your blu-ray disc player On-Screen Menu Navigation ❖ The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version.
Playing a Disc 1. Push a disc into the DISC IN with the disc’s label facing up. ❖ Using the touch keypad • In normal operation mode (the touch keypad is bright), you can simply press a touch key once to instruct the Blu-ray Disc Player to perform the corresponding operation. • If no manipulation or input is made for about 30 seconds after the Blu-ray Disc Player turns on, it switches to Dimmer mode.
basic functions of your blu-ray disc player Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track hgfZCV During playback, press the SEARCH ( Each time you press the SEARCH ( ) button. ) button, the playback speed will change as follows.
system setup For your convenience, you can set this player’s features for the best use in your home environment. Setting the Clock 1. With the unit in Stop mode, press the MENU button. Music . Press the ENTER or ► button. . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Photo No disc Setup . Press the ▲▼ buttons to select System, then press the ENTER or + button. . Press the ▲▼ buttons to select Time Zone, then press the ENTER or + button. .
language setup Setting up the Language Options Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically every time you watch a movie. M ` If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc menu to make the selection. 1. With the unit in Stop mode, press the MENU button. . Press the ENTER or ► button. . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. .
audio setup Setting up the Audio Options Allows you to set up the Audio device and sound status depending on the audio system being used with the player. 1. With the unit in Stop mode, press the MENU button. Music System Photo No disc Setup Language ◄ Audio Display . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Network ► ● AUDIO SETUP . Press the ENTER or ► button. HDMI Parental . Press the ▲▼ buttons to select Audio, then press the ENTER or + button. .
audio setup M ` Be sure to select the correct Digital Output or you will hear no sound or a loud noise. ` If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM. ` Secondary and Effect audio will not be heard with regular DVDs. ` Some Blu-ray Discs do not have Secondary and Effect audio. ` This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV.
Downmixing mode No disc Music Photo Setup Digital Output : PCM System PCM Down Sampling : On Language Dynamic Compression : On Audio Display HDMI ◄ Downmixing mode ► : Normal stereo ✓ Normal stereo Surround Compatible Network Parental ● AUDIO SETUP This option enable you to compatible with Dolby Pro Logic systems. ~ Normal stereo : This is for just downmixing into 2ch audio.It is not compatible with Dolby Surround or Dolby Surround Pro Logic or Dolby Pro Logic II.
display setup Setting up the display Options This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. System Music Language Photo No disc Setup Audio _ Display . Press the ENTER or ► button. HDMI . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Parental . Press the ▲▼ buttons to select Display, then press the ENTER or + button.
Movie Frame (24 Fs) Movies are usually filmed at 24 frames per second. Some Blu-ray Discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray Disc Player's HDMI output to 24 frames per second for improved picture quality. System Music Language Photo No disc Audio Display Setup You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.
display setup ❖ Resolution according to the output mode ~ Blu-ray Disc playback Output HDMI Video 1080p, Movie Frame(24Fs) off 1080p@60F 576i (480i) 1080p/1080i, Movie Frame (24Fs) on 1080p@24F 576i (480i) 1080i, Movie Frame (24Fs) off 1080i 576i (480i) 720p 720p 576i (480i) 576p (480p) 576p (480p) 576i (480i) 576i (480i) 576p (480p) 576i (480i) HDMI Video 1080p 1080p@60F 576i (480i) 1080i 1080i 576i (480i) Setup ~ DVD playback Output Setup M 720p 720p 576i (480i) 576p (48
Frame & Field bar Still Mode Music Photo No disc Setup System Movie Frame (24 Fs) Language Resolution : 1080p Progressive Mode : Auto Audio : Off Still Mode : PCM ✓ Auto HDMI Screen Message Network Front Display : On Field Frame : Bright Display ◄ ► Parental ● DISPLAY SETUP Set the Auto, Field or Frame setting for the best possible still picture (pause mode) from a DVD.
HDMI setup Setting up the HDMI setup options 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Language Music . Press the ENTER or ► button. Audio Photo No disc Setup Display ◄ HDMI ► Network Parental . Press the ▲▼ buttons to select HDMI, then press the ENTER or + button. HDMI setup menu will be displayed. . Press the ▲▼ buttons to select the desired display option, then press the ENTER or + button.
~ Available buttons on the Samsung TV remote: These buttons work the same as this Blu-ray Disc player's remote control. - Playback control buttons : - Menu operation button : - Numeric buttons : ~ - Colour buttons : M ● HDMI SETUP TV Anynet+ Menu When you press the Anynet+ button on your Samsung TV's n remote control, the following On-Screen Display (OSD) will BD Player be shown.
HDMI setup BD Wise (Samsung products only) BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically. ~ On : The original resolution of the BD/DVD disc will be Language Music Anynet+ (HDMI-CEC) : On output to the TV directly.
parental setup Setting up the Parental Lock The Parental Lock function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating which helps you control the types of Blu-ray Disc/DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. . Press the ▲▼ buttons to select Parental, then press the ENTER or + button.
parental setup If you forgot your password 1. Remove the disc. . Press and hold the SKIP (]) button on the top panel for 5 seconds or more. ~ All settings will revert to the factory settings. M ` When the factory default settings are restored, all the user data stored in the BD data will be deleted. Setting the Rating Level 1. Press the ▲▼ buttons to select Rating Level, then press the ENTER or + button. . Press the ▲▼ buttons to select the rating level you want, then press the ENTER button.
network setup SETTING UP THE NETWORK SETUP OPTIONS To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider. To set the network of your Blu-ray Disc player, follow the steps below. . Press the ENTER or ► button. Audio Music Display Photo No disc Setup . Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. ● NETWORK SETUP 1. With the unit in Stop mode/No Disc mode, press the MENU button.
network setup . Press the ▲▼ buttons to select a desired item, then press the ENTER button. ~ If DHCP is set to Off and, DNS to Manual, enter your IP Address, Subnet Mask, Gateway and Primary DNS settings (Secondary DNS is optional). Audio Music No disc Setup Cable Network Network Selection : : Off : 0 Cable . 0 .Network 0 . 0 : 255Wireless . 255 . 255 . 0 Network Gateway : 0 Proxy . 0 . 0 . 0 Parental DNS : Manual NTP Server : Primary DNS : 0 . 0 . 0 . 0 Test Secondary DNS : 0 Network . 0 .
. Press the ▲▼ buttons to select DHCP, then press the ENTER button. M Audio Music ` If DHCP is set to On, you can't select IP Address, Subnet No disc Wireless Network Display Photo Network Selection : Not Selected HDMI Access Point Setup Mask or Gateway. DHCP Network : ◄ OnCable Network IP Address Parental Subnet Mask : : ► 0 Wireless . 0 . 0Network . 0 : 255Proxy . 255 . 255 . 0 Gateway : 0 . 0 . 0 . 0 NTP Server : Off DNS : Auto Network Connection Test DNS Server : 0 . 0 . 0 .
network setup ~ If DHCP is set to On and, DNS to Manual, enter your DNS Server. Audio Music Display Photo No disc Setup _ Wireless Network Network Selection : Not Selected : On Cable Network : 0 Wireless . 0 . 0Network . 0 : 255 . 255 . 255 . 0 Proxy : 0 . 0 . 0 . 0 NTP Server : Manual Access Point HDMI DHCP Network IP Address ◄ Subnet Mask Gateway Parental DNS DNS Server Save ~ If DHCP is set to On and, DNS to Auto, you don’t need further or additional settings.
NTP Server (Used to Retrieve Time Information from NTP Server) To setup, follow steps 1~4 on page 51. . Press the ▲▼ buttons to select NTP Server, then press the ENTER or + button. ~ On : The player automatically connects to the Internet server in order to adjust the time setting. ~ Off : The player does not connect to the Internet server to adjust the time setting.
pc streaming function The shared folder setup method may be different, depending on the PC operating system. CONNECTING TO A PC AND PLAYING MP3, JPEG, DIVX, MKV and MP4 CONTENT You can connect the Blu-ray Disc player to a PC and play mp3, jpeg, DivX, MKV and MP4 file content in a shared folder. (Refer to pages 31~32 for the connection) 1. Use a router and LAN cable or wireless LAN adapter to connect between the PC and Blu-ray Disc player. .
2. Enter the PC’s user name in the window. No disc Music User DISC e-Contents + Photo _ B A B C D Q R S T g h i j w x y z + = . ~ a Back Space C Setup E F G U V W k l m 1 2 3 ! @ # b Space - Number H X n 4 $ I J K Y Z a o p q 5 6 7 % ^ & c Clear L b r 8 ( M N O c d e s t u 9 0 − ) / ? d Save s Select P f v _ | r Return a Network Search No disc DISC Password e-Contents + ● pc streaming function 3. Enter the PC’s password in the window. The shared folder will be displayed.
pc streaming function 3. Type in the PC’s password then press the Blue (D) button to Save. No disc DISC e-Contents + C B Manual Search 1 2 3 4 Please input password _ A B C D Q R S T g h i j w x y z + = . ~ a Back Space - Number E F G U V W k l m 1 2 3 ! @ # b Space H X n 4 $ I J K Y Z a o p q 5 6 7 % ^ & c Clear s Select L b r 8 ( M N O c d e s t u 9 0 − ) / ? d Save P f v _ | r Return a Network Search . Press the ► button, then press the ▲▼ button to select Video, Music or Photo.
BD data management BD Data (stored in internal flash memory: Approx. 1G Byte) is Blu-ray Disc content such as trailers and other special features downloaded from the BD-LIVE service or Blu-ray Discs. You can manage user data stored in BD data. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Photo No disc Setup . Press the ▲▼ buttons to select System, then press the ENTER or + button.
BD data management DIVX(R) REGISTRATION Please use the Registration code to register this Blu-ray Disc Player with the DivX(R) Video On Demand format. For more information, visit www.divx.com/vod Music Photo No disc Setup System Power On/Off sound : On Touch Key Sound : On BD Data Management DivX(R) Registration ◄ DivX(R) Registration ► DivX(R) Video On Demand Language DivX(R) Deactivation Your registration code is : XXXXXXXXXX Audio System Update To learn more visit www.divx.
system upgrade Samsung may offer upgrades to your Blu-ray Disc Player's firmware in the future. To upgrade this firmware you must : 1. USB : Visit www.samsung.com/bluraysupport, then download and store the latest firmware (RUF file) into the USB flash drive. Connect the USB flash drive to the USB port of Blu-ray Disc Player(disc tray must be empty) to update the firmware, then follow the on-screen instructions. 3.
system upgrade ~ If there is a disc in the player : "Please maintain "No Disc" state for network update." This indicates that you must remove all discs from the unit to perform the update. ~ If the server service is not available : “ Update Server is under maintenance. Please try again later.” . To perform the system upgrade, press the _ + buttons to select Start and then press the ENTER button.
` Do not use USB devices other than USB Flash Drives to do software upgrades using the USB Host jack. ` There should be only one firmware upgrade file in the USB flash drive for the player to properly perform an upgrade. ` Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected. System Information When the firmware upgrade is done, check the firmware details by following the steps below. . Press the ENTER or ► button. Music Photo No disc Setup ◄ System ► .
watching a movie Using the Display Function hgfZCV 1. During playback, press the INFO button on the remote control. ~ If the Blu-ray Disc has the BONUSVIEW feature, press the INFO button in the BONUSVIEW section to display BONUSVIEW-related information. . Press the ▲▼ buttons to select the desired item. . Press the _ + buttons to make the desired setup change and then press the ENTER button.
Using the Disc Menu & Popup/Title Menu hZ Using the Disc Menu 1. During playback, press the DISC MENU button on the remote control. PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS % 3 M 4 5 6 7 8 9 10 11 12 13 14 15 ` Depending on the disc, the Disc Menu may not be available. Z Using the Title Menu 1. During playback, press the TITLE MENU button on the remote control. . Press the ▲▼_ + buttons to make the desired selection, then press the ENTER button.
watching a movie h Using the Popup Menu 1. During playback, press the POPUP MENU button on the remote control. MAIN MENU AUDIO SET UP . Press the ▲▼_ + buttons or ENTER button to select the desired menu. ~ The Popup menu setup options may vary from disc to disc. SCENE SELECTIONS % 3 M SUBTITLES 4 5 6 7 8 9 10 11 12 13 14 15 ` Depending on the disc, the Popup Menu may not be available. Repeat Play Repeat the current chapter or title. hgfZCV Repeat playback 1.
Selecting the Audio Language hgfZ You can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button 1. Press the AUDIO button during playback. The Audio changes when the button is pressed repeatedly. ~ The audio languages are represented by abbreviations. Audio 1/4 ENG Dolby Digital Multi CH ● WATCHING A MOVIE . To remove the Audio bar, press the CANCEL or RETURN button. Using the INFO button 1. During playback, press the INFO button on the remote control.
watching a movie Using the INFO button 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Subtitle. 3. Press the _ + buttons on the remote control to select the desired subtitle language. M ` Depending on the Blu-ray Disc / DVD, you may be able to change the desired subtitle in the Disc Menu. Press the DISC MENU button. ` This function depends on what subtitles are encoded on the disc and may not be available on all Blu-ray Discs/DVDs.
BONUSVIEW Settings The Bonusview feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. h Using the BONUSVIEW button ● WATCHING A MOVIE 1. If the current Blu-ray Disc features the BONUSVIEW function, you can use the BONUSVIEW button to turn BONUSVIEW On or Off. . Each time you press the BONUSVIEW button, you can toggle between BONUSVIEW On and BONUSVIEW Off.
listening to music Buttons on the Remote Control used for Audio CD (CD-DA)/MP3 playback 1. PAUSE button : Pauses playback. 0 2. SKIP ( ) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. BONUSVIEW PAUSE STOP 3. PLAY button : Plays the currently selected track. PLAY 4. ▲▼ buttons : Selects a track(song) in the Music List or Playlist. 5. Colour buttons ~ RED(A) button : Selects the Play Mode(Repeat) during playback.
You can select the data source by pressing the $% button in the menu screen. (PC/CD/DVD/USB memory flash stick) AF Playing an Audio CD(CD-DA)/MP3 ► TRACK 001 1/18 00:02:24 / 00:05:57 CD a Play Mode . To move to the Music List, press the STOP or RETURN button. The Music List screen is displayed on your TV. . Press the ▲▼ buttons to select the track you want to play, and then press the ENTER button.
AF Playlist You can create a playlist with up to 99 tracks. 1. Insert an Audio CD(CD-DA) or an MP3 Disc into the disc tray. ~ For an Audio CD, the first track will be played automatically. ~ For an MP3 disc, press the ▲▼ buttons to select Music, then press the ENTER button.
AGF MP3 & JPEG Simultaneous playback You can enjoy listening to MP3 files while you simultaneously view JPEG files. 1. When you play MP3 file, press the BLUE(D) button. The slide show speed screen will be displayed. . Select the desired slide show speed. ► 1/18 00:02:24 / 00:05:57 d Slide Show ` To operate this function, you have to select the folder containing both music and photo files.
playing back a picture GF Playing a JPEG disc 1. Insert a JPEG disc into the disc tray. (You can watch the jpeg files using a USB memory flash stick) Video Music CD Photo _ + Setup . Press the ▲▼ buttons to select the Photo, and then press the ENTER or ► button. Video Music Photo CD _ Setup . Press the ▲▼ buttons to select the folder you want to play, and then press the ENTER button. .. + 640 jpg 03 JUL 2000 full jpg 03 JUL 2000 Video Music Photo CD _ Setup .. + gun001.
using the e-contents With this Blu-ray Disc Player, you can use the e-Contents service (YouTube, for example) via the network. After performing the network connection (see pages 31~32), check the network setup (see pages 51~55). ● using the e-contents M ` According to company policy, the specifications are subject to change. ` e-Content video playback may pause, stop or buffer, depending on your broadband speed.
using the e-contents Featured Shows a list of featured videos. Visited History Shows a history of visited videos. My Favorites If you have logged into your YouTube account with the Blu-ray Disc Player and added a video to My Favorites, you can play the video on the Blu-ray Disc Player or a PC that is synchronized with the YouTube site. Player Library You can add videos to the Player Library without logging into your YouTube account.
. Enter the 4-digit numeric password. You can login YouTube on this Blu-ray Disc Player simply by pressing numeric buttons. Worldwide Most viewed Top rated Most Popular Most Discussed Top Favorites Most Linked Most Responded Featured Visited History My Favorites You Tube bkj Today abc... Numeric Password Setting Views : 5969 Rating : Enter new password def...
using the e-contents Searching a video 1. Press the ▲▼ button to select Search, then press the ENTER button. . Press the _+ buttons to select the search criteria, then press the ENTER button. ~ Relevance: Select this if you want to search for similar videos. ~ Published: Select this if you want to sort videos by the created date. ~ View count: Select this if you want to sort videos by the view count. ~ Rating: Select this if you want to sort videos by the rating. .
. Press the ▲▼ buttons to select the desired video, then press ENTER button to play the video. YouTube > Search Worldwide You Tube abcd A wild goose is honking. + 00:00:00 / 00:06:23 Views : 196 Ratings : 2009-05-21 Report copyright violations: http://www.youtube.
using the e-contents Player Library You can add videos to the Player Library without logging into your YouTube account. Saving a video 1. Press the GREEN(B) button during the playback. YouTube > Most viewed . Press the ENTER button. The desired video will be added to player library. Worldwide You Tube Falling in love I love my dogs. "Falling in love" added to Player Library. OK + 00:00:00 / 00:06:23 Views : 196 Ratings : 2009-05-21 Report copyright violations: http://www.youtube.
appendix troubleshooting Before requesting service, please check the following. PROBLEM • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • R emove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play.
appendix PROBLEM If you experience other problems. SOLUTION • G o to the contents and find the section of the instruction manual that contains the explanations regarding the current problem, and follow the procedure once again. • I f the problem still cannot be solved, please contact your nearest Samsung authorized service center. The picture is noisy or distorted • Make sure that the disc is not dirty or scratched. • Clean the disc. No HDMI output.
Specifications General DC12V, 3.0A Power Consumption 25W Weight 1.8 Kg Dimensions 461 (W) × 195 (D) × 42 (H) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % BD (Blu-ray Disc) Reading Speed : 4.917m/sec DVD (Digital Versatile Disc) Disc CD : 12 cm (COMPACT DISC) CD : 8 cm (COMPACT DISC) Video Output Composite Video Video/Audio HDMI Audio Output Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
appendix COPY PROTECTION ~ Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
❖ ❖ ❖ ❖ This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www.freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. This Product uses some software programs which are distributed under the OpenSSL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 021111307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machinereadable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.