Operation Manual

Installation
English36
Installation
STEP 3 Flooring
The surface to install the refrigerator
must support a fully loaded refrigerator.
To protect the oor, put a large piece
of cardboard on each foot of the
refrigerator.
Once the refrigerator is in its nal
position, do not move it unless
necessary to protect the oor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
STEP 4 Adjust the levelling legs
CAUTION
The refrigerator must be levelled on a at, solid oor. Failing to do so can cause damage
to the refrigerator or physical injury.
Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
The refrigerator can be levelled using the front legs that have a special screw (leveller) for
levelling purposes. Use a at-head screwdriver for levelling.
To adjust the height of the left side:
Insert a at-head screwdriver into the
leveller of the front left leg. Turn the
leveller clockwise to raise, or turn it
counter clockwise to lower.
To adjust the height of the right side:
Insert a at-head screwdriver into the
leveller of the front right leg. Turn the
leveller clockwise to raise, or turn it
counter clockwise to lower.
Untitled-6 36 2017-11-14  4:48:35