User manual

13
ENGLISH
USING THE STEAM CLEANING
The steam provided by steam clean system will soak the cavity surface.
After using steam clean function, you can easily clean the cavity of oven.
Use this function only after the oven has completely cooled. (Room
temperature)
Use normal water only,and no distilled water.
It will be more better if you do a deodorization function after using
Steam cleaning.
The water in the oven will be very hot due to the steam cleaning
function.
1. Open the Door.
2. Fill with water following guide line inside the water bowl.
(The line is about 30 ml.)
3. Please attach the water bowl in right side of the oven.
4. Close the door.
5. Press the Steam clean (
) button.
(Bulb does work during Steam cleaning time.)
6. Open the Door.
7. Please clean cavity of oven with dried dishtowel.
Remove the turntable and only under rack with kitchen
paper.
• Water Bowl only can be use during “Steam Clean” mode.
• When cooking non-liquid items, remove water bowl because It
will damage and cause fire to the microwave oven.
SWITCHING THE BEEPER OFF
You can switch the beeper o whenever you want.
1. Press the
and buttons at the same time.
Result :
• The following indication is displayed.
• The oven does not beep each time you press a button.
2. To switch the beeper back on, press the and buttons
again at the same time.
Result :
• The following indication is displayed.
• The oven operates with the beeper on again.
WARNING
CE103FF-2S_XTL_DE68-04069A_EN.indd 13 2011-09-19  10:58:39