دليل المستخدم

Remembering Function (CE2974N/CE2974NT)

This oven remembers the last cooking power level for your

convenience.

✉

• When cooking is over, the end reminder signal will beep 3

times.(Chime bell per 1min). And then, cooking mode will be

“RESET” and the oven will forget the last cooking mode.

• If there’s no operation after the door is opened and closed

once, the cooking mode will be “RESET” after 30 seconds.

•PresstheCancel( ) button and then cooking mode will be

“RESET”.

Manual Stop Turntable Function

The turntable on/off( ) button enables you to use large dishes which

fill the whole oven by stopping the turntable from rotating.

☛ The results will be less satisfactory in this case as the cooking is

less even. We recommend that you turn the dish by hand halfway

through the cooking process

☛ Warning! Never operate the oven without local when turntable

button is off.

•

Result: This condition may cath fire and extre damage the

oven.

Model : CE2974N/CE2974NT

✉ Don’t press Turntable on/off( ) button during cooking process.

The turntable doesn’t rotate when the lamp is “ON”.

Model : CE2914N/CE2914NT

✉ Don’t press Turntable on/off( ) button during cooking process.

1. Set the add some cooking time by turning the dial knob.

2. Press the button.

1. Press the Turntable on/off()button.

Result:

The following indication is displayed.

The turntable will not rotate.

2. To switch the turntable rotating back on, press the

Turntable on/off( ) button again.

Result:

The turntable will rotate.

Push the Turntable on/off()button.

Result:

If the turntable button can be pressed, it will

rotate. If the turntable button pop, it will not

rotate.

CE2974-GB.fm Page 21 Thursday, November 21, 2002 5:21 PM