CLX-318x Series Multi-Functional Printer User’s Guide imagine the possibilities Thank you for purchasing a Samsung product.
contents COPYRIGHT 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 3 3 3 5 5 6 6 6 6 Safety information Regulatory information About this user’s guide Features of your new product INTRODUCTION 1 1 1 3 4 4 5 6 8 8 8 8 8 8 9 9 Machine overview (CLX-3185/CLX-3185N/CLX-3185WK) Front view Control panel overview (CLX-3185/CLX-3185N/CLX-3185WK) Machine overview (CLX-3185FN/CLX-3185FW) Front view Rear view Control panel overview (CLX-3185FN/CLX-3185FW) Understanding the Status LED Introducing the useful buttons Menu button Po
10 10 10 11 PRINTING Completing the Installation Troubleshooting Wireless network problems Solving other problems 1 1 1 1 1 1 1 2 2 2 3 3 3 3 3 3 4 4 4 5 5 6 6 6 6 6 6 7 7 7 8 8 BASIC SETUP 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 Altitude adjustment Changing the display language Setting the date and time (CLX-3185FN/CLX-3185FW only) Changing the clock mode (CLX-3185FN/CLX-3185FW only) Changing the default mode (CLX-3185FN/CLX-3185FW only) Setting sounds Key sound and alarm sound (CLX-3185/CLX-3185
1 1 1 2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 6 6 6 6 7 7 7 7 7 7 8 8 5 5 5 6 6 6 6 6 6 6 6 7 7 8 Basic scanning method Scanning originals and sending to your computer (Scan to PC) For USB connected machine For network connected machine (CLX-3185N/CLX-3185FN/CLX-3185FW/CLX-3185WK only) Scanning by a network connection (Scan to Email) (CLX-3185FN/CLX-3185FW only) Setting up an e-mail account Scanning to Email Changing the settings for each scan job Changing the default scan settings Setting up Address Book (CLX-3185
14 15 15 15 16 17 1 1 1 1 1 2 2 2 2 3 3 3 3 3 4 5 5 Introducing useful management tools Using SyncThru™ Web Service (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185FW only) To access SyncThru™ Web Service SyncThru™ Web Service overview E-mail notification setup Setting the system administrator information Using the Smart Panel program Understanding Smart Panel Changing the Smart Panel Program Settings SmarThru Starting SmarThru Using the Linux Unified Driver Configurator Opening the Unified Driver Configurator P
copyright © 2010 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • • • • Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place for future reference.
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. ► This could result in electric shock or fire. If the plug does not easily enter the electrical outlet, do not attempt to force it in.
Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people. ► The machine could fall, causing injury or machine damage. Do not put a cover over the machine or place it in an airtight location, such as a closet. ► If the machine is not well-ventilated, this could result in fire.
Keep the power cable and the contact surface of the plug clean from dust or water. ► Otherwise, this could result in electric shock or fire. To clean and operate the machine, strictly follow the user's guide provided with the machine. ► Otherwise, you could damage the machine. Do not remove any covers or guards that are fastened with screws. ► The machine should only be repaired by a Samsung service technician. Supply usage Caution Do not disassemble the toner cartridge.
regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001. Class I laser products are not considered to be hazardous.
Mercury Safety Contains Mercury, Dispose According to Local, State or Federal Laws.(U.S.A. only) Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
UNITED STATES OF AMERICA Federal Communications Commission (FCC) Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the following information: 1. the date and time of transmission 2. identification of either business, business entity or individual sending the message; and 3.
Replacing the Fitted Plug (for UK Only) Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. Contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitable.
EC Certification Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries: In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co.
Regulatory Compliance Statements Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. 5.
China only Regulatory information_ 10
Regulatory information_ 11
about this user’s guide This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and use of the machine. •Read the safety information before using the machine (See "Safety information" on page 1). •If you have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 1).
Finding more information You can find information about setting up and using your machine in the following resources, either as a print-out or on screen. Material name Description Quick Installation Guide This guide provides information on setting up your machine. This guide is provided in the box with the printer. User’s Guide This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine, troubleshooting, and replacing supplies.
features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. Special Features Print with excellent quality and speed Copy originals in several formats • • • • You can print with a full range of colors using cyan, magenta, yellow and black. You can print with a resolution of up to 2400 x 600 dpi effective output. Your machine prints A4-sized paper at up to 16 ppm and Letter-sized paper at up to 17 ppm.
Features by Models The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business. Some features and optional goods may not be available depending on models or countries. The below table is a listing of the major features by each model.
introduction 1. This chapter gives you an overview of your machine.
Rear view 1 5 2 4 3 This illustration may differ from your machine depending on its model. 1 Rear door handle 4 USB port 2 Rear door 5 Network porta 3 Power cord receptacle a.
Control panel overview (CLX-3185/CLX-3185N/CLX-3185WK) This control panel may differ from your machine depending on its model. 1 2 3 16 4 15 5 14 6 7 13 8 5 12 11 10 9 Power Allows you to turn the power on and off (See "Power button" on page 8). Eco Copy Reduces toner consumption and paper usage (See "Eco Copy button (CLX-3185/CLX-3185N/CLX-3185FN only)" on page 8).
Machine overview (CLX-3185FN/CLX-3185FW) Front view 1 14 10 2 9 11 15 3 8 4 7 16 6 12 13 5 This illustration may differ from your machine depending on its model.
Rear view 1 7 6 5 2 4 3 This illustration may differ from your machine depending on its model.
Control panel overview (CLX-3185FN/CLX-3185FW) This control panel may differ from your machine depending on its model. 1 2 3 4 22 21 5 6 7 20 8 19 9 10 7 11 12 13 18 14 17 16 15 Power Allows you to turn the power on and off (See "Power button" on page 8). Eco Copy (CLX-3185FN) Reduces toner consumption and paper usage (See "Eco Copy button (CLX-3185/CLX-3185N/CLX-3185FN only)" on page 8).
20 Scan/Email Activates Scan mode. 21 Toner Color The toner colors shown below LCD display co-works with the display messages (See "Acknowledging the status of the toner cartridge" on page 9). Direct USB (CLX-3185FN) Allows you to directly print files stored on a USB memory device when it is inserted into the USB port on the front of your machine (See "Using USB memory device (CLX-3185N/CLX-3185FN/CLX-3185WK/CLX-3185FW only)" on page 1).
Understanding the Status LED Introducing the useful buttons •Supported optional devices and features may differ according to your model. Check your model name. •Illustrations may differ from your machine depending on the model or its options. Check your model name. The color of the Status LED indicates the machine's current status. Status Off Description • • • Green Blinking • • The machine is off-line. The machine is in power saver mode.
3. Press OK when Change Default appears. 4. Press the left/right arrow until Eco Copy appears and press OK. 5. Press the left/right arrow to select the mode you want. •Mono Only: prints all original images in black and white mode. •2up/Mono: prints two original images reduced to fit onto one sheet of paper in black and white mode. •4up/Mono: prints four original images reduced to fit onto one sheet of paper in black and white mode.
getting started 1. This chapter gives you step-by-step instructions for setting up the USB connected machine and software. This chapter includes: • • • • • Setting up the hardware Supplied software System requirements Installing USB connected machine’s driver Sharing your machine locally affected. •Supported optional devices and features may differ according to your model. Check your model name. •Illustrations may differ from your machine depending on the model or its options. Check your model name.
OS Windows • • • • • • • Macintosh • • • • • • Linux Microsoft® Windows® Contents • • • • Your machine supports the following Windows operating systems. Printer driver: Use this driver to take full advantage of your machine’s features. Scanner driver: TWAIN and Windows Image Acquisition (WIA) drivers are available for scanning documents on your machine. Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing.
Linux 3. Select Install Now. Item Requirements Operating system Fedora 2~10 (32/ 64 bit) OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 11.1 (32/64 bit) SuSE Linux 9.1 (32 bit) Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit) Mandrake 10.0, 10.1 (32/64 bit) Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit) Debian 3.1, 4.0, 5.0 (32/64 bit) Redhat® Enterprise Linux WS 4, 5 (32/64 bit) SuSE Linux Enterprise Desktop 9, 10 (32/64 bit) CPU Pentium IV 2.
message appears. •After connecting the machine, click Next. •If you do not want to connect the machine at this time, click the check box next to Check if you want to install the software without connection of the printer. In this case, Print a test page window will be skipped and installation is completed. •The installation window in this User’s Guide may differ depending on the machine and interface in use. 5. The searched machines will be shown on the screen.
[root@localhost root]#tar zxf [FilePath]/PSU.tar.gz [root@localhost root]#cd [FilePath]/cdroot/Linux/psu [root@localhost psu]#./install.sh You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator. If you do not use the graphical interface and failed to install the software, you have to use the driver in the text mode. Follow the steps 3 to 4 and then follow the instructions on the terminal screen. 3.
Devices and Printers. 4.Right-click on the printer icon. 5.For Windows XP/Server 2003/Server 2008/Vista, press Properties. For Windows 7/Server 2008 R2, from context menus, select the Printer properties. If Printer properties item has a ► mark, you can select other printer drivers connected with the selected printer. 6.Select the Sharing tab. 7.Check the Share this printer. In Windows Vista or higher, press Change sharing options before check the Share this printer. 8.Fill in the Share Name field. Click OK.
network setup (clx-3185n/clx-3185wk/clx-3185fn/clx-3185f w only) 1. This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • • • • • Network environment Introducing useful network programs Using a wired network Supported optional devices and features may differ according to your model. Check your model name. (See "Features by Models" on page 2).
You can use network after connecting network cable to a corresponding port on your machine. 10.After entering all parameters, press Stop/Clear to return to ready mode. Now go to "Installing wired network-connected machine’s driver" on page 3. IPv4 setting using SetIP Program (Windows) Printing a network configuration report You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings.
enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address). •Subnet Mask: Enter a Subnet Mask. •Default Gateway: Enter a Default Gateway. 6.Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct. 7.Click Exit to close the SetIP program. 8.If necessary, restart the computer’s firewall.
•The software CD should automatically run and an installation window appears. •If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM drive. Click OK. •If you use Windows Vista, Windows 7 or Windows 2008 Server R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM drive and click OK.
7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. To register as a user of the machine in order to receive information from Samsung website, click On-line Registration. 20. For Mac OS X 10.3, select the IP Printing tab. •For Mac OS X 10.4, click IP Printer. •For Mac OS X 10.5~10.6, click IP. 21. Select HP Jetdirect - Socket in Protocol. If your machine is not connected yet to the network, click How to connect?.
10.Select your machine and click Next. 11.Input the printer description and Next 12.When the add printer is done, click Finish 13.When the install is done, click Finish Add network Printer 1.Double-click the Unified Driver Configurator. 2.Click Add Printer… 3.The Add printer wizard window opens. Click Next. 4.Select Network printer and click the Search button. 5.The printer’s IP address and model name appears on list field. 6.Select your machine and click Next. 7.Input the printer description and Next 8.
wireless network setup (clx-3185fw/clx-3185wk only) 1. This chapter gives you step-by-step instructions for setting up the wireless network connected machine and software.
Installing a wireless network with cables You can install a wireless network to connect to the machine with either a USB cable or a network cable. For most users, we recommend using a USB cable with the program provided in the supplied software CD. The following are two ways to install a wireless network with cables. • With a USB cable: You can simply set up a wireless network using the program in the supplied software CD.
connect, the machine stops the wireless connection function if the machine fails to get the wireless connection. Try again to connect to the wireless network after solving the connection problem. Canceling a wireless network connection process in PBC mode To cancel the wireless network connection function when the machine is connecting to the access point (or wireless router) in PBC mode, press the WPS ( ) button on the control panel again.
1. Check whether the USB cable is connected to the machine. 2.Turn on your computer, access point and machine. 3.Insert the supplied software CD into your CD-ROM drive. •The software CD should automatically run and an installation window appears. •If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM drive. Click OK.
Installing the machine on an Ad-Hoc wireless network (Windows) If you do not have an Access Point (AP), you may still connect the machine wirelessly to your computer by setting up an Ad-Hoc wireless network by following the simple steps below. Items to prepare Ensure you have next items ready.
If you set the computer’s wireless network as DHCP, it will take several minutes to receive the IP address. 10.The Wireless Network Setting Complete window appears. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next. 11.Click Next when the Confirm Printer Connection window appears. 12.Select the components to be installed. Click Next.
values for the machine. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. Example) If computer’s network information is as below: -IP address: 169.254.133.42 -Subnet Mask: 255.255.0.0 Machine’s network information should be as below: -IP address: 169.254.133. 43 (Use computer’s IP address, with changed last three digits.) -Subnet Mask: 255.
administrator to get the static IP address. •For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. However, if it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). •For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window.
5.Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. example, 00:15:99:29:51:A8 becomes 0015992951A8. •IP Address: Enter a new IP address for your printer. For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.) •Subnet Mask: Enter a Subnet Mask.
If your network’s Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. Note that “portthru” is the default SSID of your machine. 9.Click Next. If wireless security setting window appears, enter the registered password (network key) and click Next. 10.The confirmation window appears, please check your wireless setup. If the setup is right, click Apply. Disconnect the network cable (standard or network).
-Subnet address: 255.255.255.0 -Gateway address: 192.168.1.1 Type in the following addresses for your machine: -IP address: 192.168.1.101 -Subnet address: 255.255.255.0 -Gateway address: 192.168.1.1 Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices. Solving other problems If problems occur while using the machine on a network, check the followings.
basic setup 1. After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you step-by-step instructions for setting up the machine.
3. Press the left/right arrow until Machine Setup appears and press OK. 4. Press the left/right arrow until Clock Mode appears and press OK. 5. Press the left/right arrow to select the 12-hour or 24-hour clock format and press OK. 6. Press Stop/Clear to return to ready mode. Changing the default mode (CLX-3185FN/CLX-3185FW only) Your machine is preset to Copy mode. You can switch this default mode between Fax mode and Copy mode. 1. Press Menu on the control panel. 2.
Key Setting the paper type Assigned numbers, letters, or characters 8 TUVtuv8 9 WXYZwxyz9 0 &+-,0 * * # # 1.Press Menu on the control panel. 2.Press the left/right arrow until System Setup appears and press OK. 3.Press the left/right arrow until Paper Setup appears and press OK. 4.Press the left/right arrow until Paper Type appears and press OK. 5.Press the left/right arrow to select the paper type you want. 6.Press OK to save the selection. 7.Press Stop/Clear to return to ready mode.
Setting job timeout You can set the time the machine waits before it restores the default copy settings if you do not start copying after changing them on the control panel. 1. Press Menu on the control panel. 2. Press the left/right arrow until System Setup appears and press OK. 3. Press the left/right arrow until Machine Setup appears and press OK. 4. Press the left/right arrow until Timeout appears and press OK. 5. Press the left/right arrow until the time setting you want appears.
media and tray 1. This chapter provides information on how to load originals and print media into your machine. This chapter includes: • • • • • • • Loading originals Selecting print media Changing the tray size for print media Loading paper in the tray Printing on special media Setting the paper size and type Using the output support 2. Place the original face down on the scanner glass. Align it with the registration guide at the top left corner of the glass.
2. Load the original face up into the document feeder. Make sure that the bottom of the original stack matches the paper size marked on the document input tray. • Desired outcome: The print media you choose should be appropriate for your project. Brightness: Some print media are whiter than others and produce sharper and more vibrant images. Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper.
1. Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary. guide. If the paper that you need to print is shorter than 222 mm (8.74 inches), press and unlatch the guide lock in the tray. Unextend the tray by pushing manually the extended portion back into the tray. Adjust the paper length guide and paper width guide. 2. Pressing and unlatching the guide lock in the top of the tray, pull the tray out manually.
The tray is preset to Letter or A4 size, depending on your country. To change the size to A4 or Letter, you must adjust the lever and paper width guide properly. 1. Pull the tray out of the machine. Open the paper cover and remove paper from the tray if necessary. 2. If you want to change the size to Letter, turn over the tray, and hold the lever at the back and rotate it clockwise. 3. Place paper with the side you want to print facing up. 4 A R T L 4. Insert the tray back into the machine. 5.
• • • Archive: 70 to 90 g/m2 (19 to 24 lbs). If you need to keep the print-out for a long time, such as for archives, select this option. Glossy Photo: 111 to 220 g/m2 (30 to 58 lbs) glossy photo paper. See "Print media specifications" on page 3. Matte Photo: 111 to 220 g/m2 (30 to 58 lbs) matte photo paper. See "Print media specifications" on page 3. overhead projector. Envelopes Successful printing on envelopes depends upon the quality of the envelopes.
• Setting the paper size and type adhesive backing is designed for only a single pass through the machine. Do not use labels that are separating from the backing sheet or are wrinkled, bubbled or otherwise damaged. After loading paper in the paper tray, set the paper size and type using the control panel. These settings will apply to copy and scan modes.
The printed pages stack on the output support and it will help the printed pages to align.
printing 1. This chapter explains common printing tasks. This chapter includes: • • • • • • • • • • Printer driver features Basic printing Opening printing preferences Using help Using special print features Changing the default print settings Setting your machine as a default machine Printing to a file (PRN) Macintosh printing Linux printing Printer driver The procedures in this chapter are mainly based on Windows XP.
Opening printing preferences 1. Open the document you want to print. 2. Select Print from the File menu. The Print window appears. 3. Select your machine from the Select Printer list. You can preview the settings you selected on the upper right of the Printing Preferences. 1. Open the document you want to print. 2. Select Print from the file menu. The Print window appears. 3. Select your machine from the Select Printer. 4. Click Properties or Preferences.
Using help Click the question mark on the upper-right corner of the window and click on the topic you want to know about. Then a pop up window appears with information about that option's feature, which is provided from the driver. If you want to search information via a keyword, click the Samsung tab in the Printing Preferences window and enter a keyword in the input line of the Help option. To get information about supplies, driver update, registration and so on, click appropriate buttons. 1.
3. Select the paper size you want from the Fit to page. 4. Select the Size, Source and Type in Paper Options. 5. Click OK or Print until you exit the Print window. 3. From the Double-Sided Printing (Manual) section, select the binding option you want. •None •Long Edge: This option is the conventional layout used in bookbinding. Using watermarks The watermark option allows you to print text over an existing document.
Deleting a watermark 5.If the overlay file you want does not appear in theText drop-down list, select Edit from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window. After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. 6.
Changing the default print settings 1. Check the Print to file box at the Print window. 1. Click the Windows Start menu. 2. For Windows Server 2000, select Settings > Printers. •For Windows XP/Server 2003, select Printer and Faxes. •For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. •For Windows 7, select Control Panel > Devices and Printers. •For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3. Right-click your machine. 4.
•The setting options may differ depending on models or Macintosh OS versions. •The following pane may differ depending on your operating system or the application you are using. The following pane is the first pane you will see when you open the printer properties pane. Select other advanced features from the drop-down list. settings in the RGB Color option. •Screen: This option allows you to select options to convert continuous-tone image into printable binary image.
4. Change the print job properties using the following four tabs displayed at the top of the window. •General: This option allows you to change the paper size, the paper type, and the orientation of the documents. It enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. •Text: This option allows you to specify the page margins and set the text options, such as spacing or columns.
copying 1. This chapter gives you step-by-step instructions for copying documents. This chapter includes: • • • • • • Basic copying Changing the settings for each copy Changing the default copy settings Darkness •The supported setting options may differ according to your model. Check your model name. •It could be printed different color with fluorescent color due to the property of scanner.
The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item such as business card. order on the control panel. 2.Press the left/right arrow until Copy Feature appears and press OK. 3.Press the left/right arrow until Reduce/Enlarge appears and press OK. 4.Press the left/right arrow until the size setting you want appears and press OK. 5.
3. Press the left/right arrow until Layout appears and press OK. 4. Press the left/right arrow until Clone Copy appears and press OK to save the selection. 5. Press Stop/Clear to return to ready mode. 2. Press the left/right arrow until Copy Feature appears and press OK. 3. Press the left/right arrow until Layout appears and press OK. 4. Press the left/right arrow until 2-Up or 4-Up appears and press OK to save the selection. 5. Press Stop/Clear to return to ready mode.
4. Press the left/right arrow until Copy Collation appears and press OK. 5. Press the left/right arrow until On appears and press OK to save the selection. •On: Prints output in sets to match the sequence of originals. •Off: Prints output sorted into stacks of individual pages. 6. Press Stop/Clear to return to ready mode. 7. Enter the number of copies using the left/right arrow or numeric keypad. 8. Press Start to begin copying. One complete document will print followed by the second complete document.
scanning 1. Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer.
For network connected machine (CLX-3185N/CLX-3185FN/CLX-3185FW/CLX-3185WK only) Make sure the printer driver is installed on your computer using the software CD, since the printer driver includes the scan program (See "Installing wired network-connected machine’s driver" on page 3). 1. Make sure that your machine and the computer are connected to a network and Samsung Scan and Fax Manager is installed on the computer. 2.
3. Press Changing the default scan settings (Scan) on the control panel. 4. Press the left/right arrow until Scan to Email appears on the bottom line of the display and press OK. If you registered login ID (user name) and password on SyncThru™ Web Service, My Log in ID and Password appear. Enter the login ID and password to your machine. Go to step 6. 5. When From appears on the top line of the display, enter the sender’s email address and press OK. 6.
Searching with a particular first letter •ID: admin •Password: sec00000 1.Press Address Book until Search & Send appears on the bottom line of the display and press OK. 2.Press the left/right arrow until the number category you want appears and press OK. 3.Press the left/right arrow until ID appears and press OK. 4.Enter the first few letters of the name you want appears and press OK. 5.Press the left/right arrow until the name you want appears and press OK.
Set Scan Button tab Change Port tab Scan Destination Local Scanner •Available Destination List: Shows the list of applications currently linked to scanned images in the PC’s registry. Select the program you want to use and click the right arrow and add to Front Panel Destination List. •Front Panel Destination List: Shows the list of applications to open scanned image. •Add Application: Allows you to add application you want to use to Available Destination List.
•Scan settings: The following scan options are available. -Image Type: Allows you to chose the proper color settings for image scanning. -Resolution: Allows you to choose the image resolution. -Document Size: Allows you to choose the proper size of the scanned image. -Document Source: Allows you to choose the device (document feeder or scan glass) you want to scan with. -Prompt for additional pages: If this check box is checked, you can scan pages continuously.
Scanner and Camera wizard. Select your machine in TWAIN devices option. Make sure that Use TWAIN software check box is checked, and click Connect. •If a warning message appears, click Change Port.. to select port. •If TWAIN UI appears, from the Preference tab, click Change Port.. to select port. Windows 7 1. Make sure that the machine is connected to your computer and powered on. 2.
Settings" on page 8). Click Default to restore the default setting for the scan options. 9. When you have finished, click Scan to start scanning. The status bar appears on the bottom left of the window to show you the progress of the scan. To cancel scanning, click Cancel. 10. The scanned image appears. If you want to edit the scanned image, use the toolbar (See "Using the Image Manager" on page 8). 11. When you are finished, click Save on the toolbar. 12.
Tools Name Function Save Saves the image. Undo Cancels your last action. Redo Restores the action you canceled. Scroll Allows you to scroll through the image. Crop Crops the selected image area. Zoom Out Zooms the image out. Zoom In Zooms the image in. Scale Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically, or horizontally.
faxing (clx-3185fn/clx-3185fw only) 1. This chapter gives you information about using your machine as a fax machine. This chapter includes: • • • • • • • • Preparing to fax Using a fax in your computer Sending a fax in your machine Receiving a fax in your machine •You cannot use this machine as a fax via the internet phone. For more information ask your internet service provider.
In case of Mac OS X 10.3 or 10.4, select PDF and Fax PDF. 3. Select CLX-3180 Series fax-USB from the drop-down list in Printer. 4. Choose the number of copies you want and indicate which pages you want to fax. 5. Choose your paper size, orientation, and scale. 6. Enter the recipients’ fax number into To’s input area. You can also use Addresses pressing button, if you have stored frequently used fax numbers. 7. If necessary, enter the access code in Dialing Prefix input area. 8.
Sending a fax to multiple destinations You can use the Multiple Send feature, which allows you to send a fax to multiple locations. Originals are automatically stored in memory and sent to a remote station. After transmission, the originals are automatically erased from memory. You cannot send a color fax using this feature. 1. Press (Fax) on the control panel. 2. Load originals face up into the document feeder, or place a single original face down on the scanner glass. 3.
6. Press the left/right arrow until Priority Send appears and press OK. 7. Enter the number of the receiving fax machine and press OK. You can press speed dial numbers or select group dial number using Address book button. For details, see "Setting up Address Book" on page 6. 8. Enter the job name you want and press OK. The original is scanned into memory before transmission. 9. If an original is placed on the scanner glass, select Yes to add another pages. Load another original and press OK.
answered as a fax call, and all other ringing patterns will be forwarded to the extension telephone or answering machine plugged into the EXT socket. You can easily suspend or change DRPD at any time. Before using the DRPD option, Distinctive Ring service must be installed on your telephone line by the telephone company. To set up DRPD, you will need another telephone line at your location, or someone available to dial your fax number from outside. To set up the DRPD mode 1.
The resolution setting is applied to the current fax job. To change the default setting, see "Change Default" on page 2. Darkness You can select the degree of darkness of the original document. 1. Press (Fax) on the control panel. 2. 3. 4. 5. Press Menu on the control panel. Press the left/right arrow until Fax Feature appears and press OK. Press the left/right arrow until Darkness appears and press OK. Press the left/right arrow until the option you want appears and press OK. 6.
Registering a speed dial number 1.Press (Fax) on the control panel. 2.Press Address Book on the control panel. 3.Press the left/right arrow until New & Edit appears and press OK. 4.Press the left/right arrow until Speed Dial appears and press OK. 5.Enter a speed dial number between 1 and 240 and press OK. If an entry is already stored in the number you choose, the display shows the message to allow you to change it. To start over with another speed dial number, press Back. 6.
4.Press the left/right arrow until the number category you want appears and press OK. 5.Press the left/right arrow until ID appears and press OK. 6.Enter the first few letters of the name you want. 7.Press the left/right arrow until the name and number you want appears. Deleting a Address Book for entry 1.Press (Fax) on the control panel. 2.Press Address Book on the control panel. 3.Press the left/right arrow until Delete appears and press OK. 4.
using usb memory device (clx-3185n/clx-3185fn/clx-3185wk/clx-3185f w only) 1. This chapter explains how to use a USB memory device with your machine.
Your machine begins scanning the original, and then asks if you want to scan another page. 5. Press OK when Yes appears to scan more pages. Load another original to be scanned and press Color Start or Black Start. Regardless of the button you press, the color mode is decided as customized (See “"Customizing Scan to USB" on page 2). Otherwise, press the left/right arrow to select No and press OK. After scanning is complete, you can remove the USB memory device from the machine.
8. Press OK when Yes appears to restore the backup file to the machine. 9. Press Stop/Clear to return to ready mode. Managing USB memory You can delete image files stored on a USB memory device one by one or all at once by reformatting the device. After deleting files or reformatting a USB memory device, files cannot be restored. Therefore, confirm that you no longer need the data before deleting it. Deleting an image file 1. Insert the USB memory device into the USB memory port on your machine. 2.
machine status and advanced feature 1. This chapter explains how to browse the current status of your machine, and the method of setting for the advanced machine setup. Read this chapter carefully in order to use your machine's diverse features. This chapter includes: • • • • • • Fax setup (CLX-3185FN/CLX-3185FW only) Copy setup Printing a report Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.
Option Auto Reduction Discard Size Junk Fax Setup DRPD Mode Change Default Description When receiving a fax containing pages as long as or longer than the paper loaded in the paper tray, the machine can reduce the size of the original to fit the size of the paper loaded in the machine. Turn on this feature if you want to automatically reduce an incoming page. With this feature set to Off, the machine cannot reduce the original to fit onto one page.
7. Repeat steps 4 through 6, as needed. 8. Press Stop/Clear to return to ready mode. Option Change Default Option Description Sent Report This report shows information on the faxes you have recently sent. You can set the machine to automatically print this report every 50 communications (See "Sending" on page 1). Fax RCV Report This report shows information on the faxes you have recently received.
Option Menu overview Description Scan Setup Restores all of the scan options to the factory default. System Setup Restores all of the system options to the factory default. Network Setup Restores all of the network options to the factory default. Address Book Clears all of the fax numbers entries stored in memory. Sent Report Clears all records of sent faxes. Fax RCV Report Clears all records of received faxes.
Items Option Copy Setup Change Default Scan Size Copies Copy Collation Reduce/Enlarge Darkness Original Type Eco Copya Scan Feature USB Feature Scan Size Original Type Resolution Scan Color Scan Format E-mail Feature Scan Size Original Type Resolution Scan Color Scan Setup Change Default USB Default E-mail Default Items System Setup Machine status and advanced feature_ 5 Option Machine Setup Machine ID Machine Fax Nob Date & Timeb Clock Modeb Language Default Mode Power Save Timeout Altitude Adj.
Items Networkc Option TCP/IP DHCP BOOTP Static TCP/IP (IPv6) IPv6 Activate DHCPv6 Config Ethernet Speed Auto 10M Half 10M Full 100M Half 100M Full Wirelessd WPS Setting WLAN Setting WLAN Default WLAN Signal Clear Setting Network Info. a. CLX-3185/CLX-3185N/CLX-3185FN only b. CLX-3185FN/CLX-3185FW only c. CLX-3185N/CLX-3185FN/CLX-3185FW/CLX-3185WK only d.
management tools 1. This chapter introduces management tools provided to help you make full use of your machine. This chapter includes: • • • • • Introducing useful management tools Using SyncThru™ Web Service (CLX-3185N/CLX-3185WK/CLX-3185FN/CLX-3185FW only) Using the Smart Panel program SmarThru Using the Linux Unified Driver Configurator If it’s your first time logging into SyncThru™ Web Service, type in the below default ID and password.
•System Security: You can set the system administrator’s information and also enable or disable machine features. •Network Security: You can set settings for HTTPs, IPSec, IPv4/IPv6 filtering, 802.1x, Authentication servers. Maintenance tab This tab allows you to maintain your machine by upgrading firmware and setting contact information for sending emails. You can also connect to Samsung website or download drivers by selecting the Link menu. •Firmware Upgrade: You can upgrade your machine’s firmware.
3. Click Printer Setup > Utility tab > Open Printer Utility. The Smart Panel program displays the current status of the machine, the estimated level of toner remaining in each toner cartridge, and various other types of information. You can also change settings. 4. The SmarThru appears. 2 3 1 4 5 Toner Level 1 2 You can view the level of toner remaining in each toner cartridge. The machine and the number of toner cartridge(s) shown in the above window may differ depending on the machine in use.
•Remove Printer: Removes the selected machine. •Set as Default: Sets the current selected machine as a default machine. •Stop/Start: Stops/starts the machine. •Test: Allows you to print a test page to ensure the machine is working properly. •Properties: Allows you to view and change the printer properties. Classes tab The Classes tab shows a list of available machine classes. 1 Printers Configuration 2 Scanners Configuration 3 Ports Configuration To use the on screen help, click Help. 3.
Scanners configuration In this window, you can monitor the activity of scanner devices, view a list of installed Samsung machine devices, change device properties, and scan images. Shows the port type, device connected to the port, and status. 3 • • Refresh: Renews the available ports list. Release port: Releases the selected port. Sharing Ports Between Printers and Scanners Your machine may be connected to a host computer via a parallel port or USB port.
maintenance 1. This chapter provides information about maintaining your machine and the toner cartridge. This chapter includes: • • • • • • Adjusting the color contrast Finding the serial number Cleaning the machine Adjusting the color contrast Storing the toner cartridge Maintenance parts Tips for moving & storing your machine Cleaning the outside Color menu allows you to adjust the color setting. 1. Press Menu on the control panel. 2.
4. Pull the waste toner container out of the machine using the handle. 7. Holding the groove on the front of the imaging unit, push imaging unit into the machine. 5. Pull the imaging unit out of the machine using the groove on the front of the imaging unit. Do not touch the green surface of the drum located in the imaging unit. Use the handle on the cartridge to avoid touching this area. 8. Insert the waste toner container into position and then push it to make sure that it is firmly seated in place.
Cleaning the scan unit 5. Push the ADF sheet with any tool such as tweezers carefully. Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day as needed. The procedure may differ depending on your model. Check your model name. The following procedure is for CLX-3185, CLX-3185N and CLX-3185WK. 1. Slightly dampen a soft, lint-free cloth or paper towel with water. 2. Open the scanner lid. 3.
Storing the toner cartridge Items Toner cartridges contain components that are sensitive to light, temperature and humidity. Samsung suggests users follow the recommendations to ensure the optimum performance, highest quality and longest life from your new Samsung toner cartridge. Store this cartridge in the same environment in which the printer will be used. This should be in controlled office temperature and humidity conditions.
troubleshooting 1. This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • • • Redistributing toner Tips for avoiding paper jams Clearing original document jams (CLX-3185FN/CLX-3185FW only) Redistributing toner • • • Clearing paper jams Understanding display messages Solving other problems 3. Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge.
• • • • • • • paper in the tray" on page 4). Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. Do not remove paper from the tray while your machine is printing. Flex, fan, and straighten paper before loading. Do not use creased, damp, or highly curled paper. Do not mix paper types in a tray. Use only recommended print media (See "Setting the paper size and type" on page 6).
Some messages may not appear on the display depending on options or models. 1. Open the scan unit first and then inner cover. To avoid tearing the paper, pull the jammed paper out slowly and carefully. Follow the instructions in the following sections to clear the jam. 1 In the tray Click this link to open an animation about clearing a jam. 2 1. Open and close the front door. The jammed paper is automatically ejected from the machine. If the paper does not eject, go to the next step. 2.
3. Carefully remove the paper by pulling in the direction as shown below. Most of the jammed paper can be removed in this step. 4. If you see the jammed paper, pull it straight up. Skip to step 10. If you do not see the paper or if there is any resistance when you pull, stop and go to the next step. 5. Pull up the fuser lever. 4. Close the rear door. Printing automatically resumes. In the paper exit area Click this link to open an animation about clearing a jam. 1. Open and close the front door.
Understanding display messages 7. Carefully take the jammed paper out of the machine. Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ and their meaning, and correct the problem, if necessary. Checking display messages •If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call a service representative.
Message Meaning Suggested solutions Message Meaning Suggested solutions Not Compatible [color] toner The toner cartridge is not suitable for your machine. Install the corresponding toner cartridge with a Samsung-genuine cartridge (See "Replacing the toner cartridge" on page 2). Not installed Waste tank The waste toner container is not installed. Install the waste toner container. Not original [color] toner The toner cartridge is not a Samsung-genuine toner cartridge.
Message Meaning Suggested solutions Prepare toner ▼ Small amount of toner is left in the indicated cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for a replacement. You may temporarily increase the printing quality by redistributing the toner (See "Redistributing toner" on page 1). Replace Fuser soon The estimated life of fuser unit is close. Prepare a fuser unit for replacement (See "Available maintenance parts" on page 1).
Message Meaning Suggested solutions Self Diagnostics Please wait The engine in your printer is checking some problems detected. Please wait a few minutes. Toner Supply Err. ▼ The machine cannot detect a toner cartridge. Remove the toner hopper sheet from the toner cartridge (See "Replacing the toner cartridge" on page 2). Or open and close the front door. If the problem persists, turn the power button off and on. Too many Faxes Remove Job Too many faxes are received. Remove received faxes.
Condition The machine is not receiving power, or the connection cable between the computer and the machine is not connected properly. Condition Suggested solutions • Plug in the power cord and press the control panel. (power) on Paper sticks together. Suggested solutions • • • • • Disconnect the machine cable and reconnect it. -For Local Printing Multiple sheets of paper do not feed. Different types of paper may be stacked in the tray. Load paper of only one type, size and weight.
Printing problems Condition The machine does not print. Possible cause Condition Suggested solutions The machine is not receiving power. Check the power cord connections. Check the power switch and the power source. The machine is not selected as the default machine. Select your machine as your default machine in your Windows. Check the machine for the following. • The front door or rear door is not closed. Close the door. • Paper is jammed. Clear the paper jam (See "Clearing paper jams" on page 2).
Condition The machine prints, but the text is wrong, garbled or incomplete. Pages print, but they are blank. Possible cause Suggested solutions The machine cable is loose or defective. Disconnect the machine cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable. The wrong printer driver was selected.
Condition Toner specks Suggested Solutions • • Dropouts The paper may not meet specification, for example, the paper may be too moist or rough (See "Selecting print media" on page 2). The paper path may need cleaning (See "Cleaning the inside" on page 1). If faded areas, generally rounded, occur randomly on the page: • A single sheet of paper may be defective. Try reprinting the job. • The moisture content of the paper is uneven or the paper has moist spots on its surface.
Condition Suggested Solutions Toner particles are around bold characters or pictures The toner might not adhere properly to this type of paper. • Change the printer option and try again. Go to the Printing Preferences, click the Paper tab, and set the paper type to Recycled. Misformed characters • • Page skew A aBb A aBb C A aBb C A aBb C A aBb C c Cc Curl or wave • • • If characters are improperly formed and producing hollow images, the paper stock may be too slick.
Condition Curl Suggested Solutions Condition If the printed paper is curled or paper does not feed into the machine: • Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. • Change the printer option and try again. Go to printer properties, click Paper tab and set type to Thin Paper (See "Opening printing preferences" on page 2). Toner cartridge produces fewer copies than expected before running out of toner.
Condition Suggested solutions Message appears on your computer screen: • Device can’t be set to the H/W mode you want. • Port is being used by another program. • Port is Disabled. • Scanner is busy receiving or printing data. When the current job is completed, try again. • Invalid handle. • Scanning has failed. • • • • • • condition There may be a copying or printing job in progress. Try your job again when that job is finished. The selected port is currently being used.
Condition “Fail To Print”, “A printer timeout error occurred” messages appear. Common Linux problems Suggested solutions These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. condition The machine does not print.
condition I cannot scan via Gimp Front-end. I encounter the “Cannot open port device file” error when printing a document. The machine does not appear on the scanners list. Suggested solutions condition Check if Gimp Front-end has Xsane: Device dialog on the Acquire menu. If not, you should install Xsane plug-in for Gimp on the your computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page.
supplies and accessories 1. This chapter provides information about purchasing supplies, accessories and maintenance parts available for your machine. This chapter includes: • • • • • • • How to purchase Available supplies Available maintenance parts Checking replaceable’s lifespan •Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your model name. •Available accessories may differ from country to country.
Checking replaceable’s lifespan 3. Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine. If you experience frequent paper jams or printing problems, check the number of pages the machine has printed. Replace the corresponding parts, if necessary. 1. Press Menu on the control panel. 2. Press the left/right arrow until System Setup appears and press OK. 3. Press the left/right arrow until Maintenance appears and press OK. 4.
If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. 3. Grasp the handles on the front cartridge and pull to remove four cartridges from the machine. 8. Make sure that the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place. 4. Pull the waste toner container out of the machine using its handle. 9. Close the front door.
7. Holding the groove on the front of the imaging unit, push imaging unit in to the machine. Replacing the waste toner container When the life span of the waste toner container has expired, the Smart Panel program window appears on the computer, indicating the waste toner container needs to be replaced. Otherwise your machine stops printing. 1. Turn the machine off, then wait a few minutes for the machine to cool. 2. Using the handle, completely open the front door. 8.
6. Insert the new container into position and then push it to make sure that it is firmly seated in place. 7. Close the front door firmly. If the front door is not completely closed, the machine will not operate. Please, make sure all toner cartridges are installed properly. If any toner cartridge is installed improperly, the front door do not close. 8. Turn the machine on.
specifications 1. This chapter covers the machine’s primary specifications. This chapter includes: • • • • Hardware specifications Environmental specifications Electrical specifications Print media specifications The specification values are listed below: specifications are subject to change without notice. See www.samsung.com/printer for possible changes in information. Hardware specifications Item Dimensions Weight Description Height • • CLX-3185/CLX-3185N/CLX-3185WK: 310 mm (12.
Electrical specifications Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. Doing so might damage the device and void the product warranty. Item Power ratinga Power consumption Description 110 volt models AC 110 - 127 V 220 volt models AC 220 - 240 V Average operating mode Less than 350 W Ready mode Less than 60 W Power save mode • • Power off mode Less than 0.
Print media specifications Type Plain paper Size Weighta Dimensions Letter 216 x 279 mm (8.50 x 11.00 inches) Legal 216 x 356 mm (8.50 x 14.00 inches) US Folio 216 x 330 mm (8.50 x 13.00 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.50 x 13.50 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184 x 267 mm (7.25 x 10.50 inches) A5 148 x 210 mm (5.83 x 8.26 inches) A6 105 x 148 mm (4.13 x 5.
contact samsung worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country/Regio n Customer Care Center Web Site Country/Regio n Customer Care Center Web Site GERMANY 01805 - SAMSUNG (726-7864 € 0,14/min) GEORGIA 8-800-555-555 GUATEMALA 1-800-299-0013 www.samsung.com HONDURAS 800-7919267 www.samsung.com HONG KONG (852) 3698-4698 www.samsung.com/hk www.samsung.com/hk_en/ HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.
Country/Regio n PHILIPPINES Customer Care Center Web Site 1800-10-SAMSUNG (726-7864) 1-800-3-SAMSUNG (726-7864) 1-800-8-SAMSUNG (726-7864) 02-5805777 www.samsung.com POLAND 0 801 1SAMSUNG (172678) 022-607-93-33 www.samsung.com PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com PUERTO RICO 1-800-682-3180 www.samsung.com QATAR 800-2255 REP. DOMINICA 1-800-751-2676 www.samsung.com RUSSIA 8-800-555-55-55 www.samsung.ru SINGAPORE 1800-SAMSUNG (726-7864) www.samsung.
glossary The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system. CCD 802.11 Charge Coupled Device (CCD) is a hardware which enables the scan job. CCD Locking mechanism is also used to hold the CCD module to prevent any damage when you move the machine. 802.
DIMM Dual Inline Memory Module (DIMM), a small circuit board that holds memory. DIMM stores all the data within the machine like printing data, received fax data. Emulation focuses on exact reproduction of external behavior, which is in contrast to simulation, which concerns an abstract model of the system being simulated, often considering its internal state.
IEEE arrangements between different countries to allow international phone calls. A -T out of ITU-T indicates telecommunication. The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity. ITU-T No. 1 chart Standardized test chart published by ITU-T for document facsimile transmissions.
Modem PostScript A device that modulates a carrier signal to encode digital information, and also demodulates such a carrier signal to decode transmitted information. PostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. that is run in an interpreter to generate an image. MR Printer Driver Modified Read (MR) is a compression method recommended by ITU-T T.4. MR encodes the first scanned line using MH.
SMTP URL Simple Mail Transfer Protocol (SMTP) is the standard for e-mail transmissions across the Internet. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified, and then the message text is transferred. It is a client-server protocol, where the client transmits an email message to the server. Uniform Resource Locator (URL) is the global address of documents and resources on the Internet.
index A default settings changing the default mode 2 setting a fax header 2 tray setting 6 address book 6 answering machine/fax 4 direct USB 3, 6, 7 authentication printing a report 3 display 3, 6 document feeder 1 B duplex printing (manual) back 3, 6 printer driver 3 booklet printing 3 booklets 3 E buttons eco copy 3 eco copy 8 menu 3, 6, 8 power 8 print screen 8 start (black) 3, 6 start (color) 3, 6 stop/clear 3, 6 WPS (CLX-3185FW only) 3, 7 Entering using the number keypad 2 eoc copy 6 er
loading receiving a fax in memory 5 receiving in Ans/Fax mode 4 receiving in Tel mode 4 receiving with an extension telephone 4 redialing the last number 2 sending 2 sending a priority fax 3 setting the fax header 2 speed dial 6 in the document feeder 1 originals on the scanner glass 1 special media 4 M Macintosh common Macintosh problems 17 driver installation for network connected 5 driver installation for USB cable connected 4 printing 6 scanning 7 sharing a machine locally 6 supplied software 2 syste
printing a document create 5 delete 5 print 5 Linux 7 Macintosh 6 problems P copying problems 14 paper feeding problems 9 power problems 8 printing quality problems 11 placing a machine adjusting the altitude 1 spacing 1 poster 3 R power button 3, 6 rear view (CLX-3185/CLX-3185N) 2 power off rear view (CLX-3185FN/CLX-3185FW) 5 button 8 redial/pause 6 power saver regulatiory information 1 using power save mode 3 print media resolution card stock 6 envelope 5 glossy paper 6 guidelines 2 la
start button (color) 3, 6 supplied software 2 system requirements 2 using SetIP 2, 8 status LED 3, 6 stop/clear button 3, 6 Windows 7 scan 7 supplies available supplies 1 estimated toner cartridge life 4 ordering 1 SyncThru Web Service general information 1 T toner cartridge estimated life 4 handling instructions 4 non-Samsung and refilled 4 redistributing toner 1 storing 4 toner color 3, 7 tray adjusting the width and length 2 changing the tray size 2 setting the paper size and type 6 TWAIN, scan 6
