User Manual

10
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU
()
button to enter the language, and then the message
Ant. Input : Check is displayed.
➣
If any language is not selected on the Language menu, the
“Language” menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the Time menu is
displayed.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 25).
6 When you have finished, press the MENU () button.
Result:
The message
ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU
()
button.
2 Press the ▲ or ▼ button to select the Function , and then
press the œ or √ button.
3 Select the Plug & Play by pressing the ▲ or ▼ button, and
then press the œ or √ button.
Result:
The message Plug & Play is displayed.
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Plug & Play
ENJOY YOUR WATCHING
Select Enter Exit
P 1
471 MHz 48 %
Ant. Input : Check
Auto Store Exit
Time
Clock 11 : 35
Move Exit
Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 10