User Manual

English - 24
◆ Scan Mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode.
Natural, Digital and
Progressive modes are available.
◆ Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
◆ DNIe (Digital Natural Image engine )
This feature bring you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm
gives brighter, clearer, much detailed image to you.
DNIe
TM
technology will fit every signals into your eyes.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the œ or √ button.
4 Select the required option ( Scan Mode, Digital NR, or DNIe) by
pressing the
▼ or ▲ button.
5 Press the œ or √ button to change the setting.
◆ Scan Mode : Natural, Digital or Progressive
◆ Digital NR : Off or On (activating)
◆ DNIe : Off, Demo or On (activating)
➢
You can also set these options simply by
pressing the
DNIe button.
Extra Picture Settings
Move
œœ √√
Adjust Return
Picture
……
More
Digital NR
œœ
On
√√
DNIe : On
Tilt : 0
PIP
√√
TV
Move
œœ √√
Adjust Return
Picture
……
More
Digital NR : On
DNIe
œœ
On
√√
Tilt : 0
PIP
√√
TV
Move
œœ √√
Adjust Return
Picture
Mode : Dynamic
Custom
√√
Colour Tone : Normal
Size : Auto Wide
Scan Mode
œœ
Natural
√√
††
More
TV
Pre_AA68-03304A-01Eng 6/29/04 5:23 PM Page 24