User Manual

English - 25
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the œ or √ button.
4 Press the ▼ or ▲ button to select Blue Screen.
5 To activate this feature, select On by pressing the œ or √ button.
Setting the Blue Screen
If you find that the picture received is slightly tilted to one side, you
can adjust the tilt setting.
1 Press the MENU ( ) button.
Result
: The main menu is displayed.
2 Press the ▼ or ▲ button to select Picture.
Result
: The options available in the Picture group are
displayed.
3 Press the œ or √ button.
4 Press the ▼ or ▲ button to select Tilt.
5 Press the œ or √ button to reach the required setting (-7 to +7).
Using the Tilt Control Feature
Move
œœ √√
Adjust Return
Setup
Plug & Play
√√
Language : English
Time
√√
Blue Screen
œœ
On
√√
Melody : On
Demonstration
√√
TV
Move
œœ √√
Adjust Return
Picture
……
More
Digital NR : On
DNIe : On
Tilt
œœ
0
√√
PIP
√√
TV
Pre_AA68-03304A-01Eng 6/29/04 5:23 PM Page 25