User Manual
English - 53
Automatic Degaussing to Remove Colour Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and colour patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (On/Off) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off for about 30 minutes so that the automatic degauss function
can be activated, and then press the “
POWER( )” button on the remote control.
☛ If your television will be left unattended, press the “” (On/Off) button to turn your
television off.
Once you have connected up your various audio and video
systems, you can view different sources by selecting the
appropriate input.
1 Check that all the necessary connections have been made.
2 Switch your television on, then press the SOURCE
()
button
repeatedly.
Result
: The input sources are displayed in the following
order:
EXT1
-
EXT2
-
EXT3/S-Video (Option)
➢
Depending on the source selected, the pictures may appear
automatically.
➢
To watch television programmes again, press the TV ()
button and select the number of the channel required.
Viewing Pictures From External Sources
Pre_AA68-03304A-01Eng 6/29/04 5:24 PM Page 53