Wireless Audio Portable user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
What’s included ff When you charge smart phone via USB, the battery may discharge more quickly. -- Charging smart phone through the Service (USB) port takes longer than charging the unit using the adapter. It is only chargeable when this product is turned on. Check for the supplied accessories shown below. The appearance of the accessories may differ slightly from the illustrations. SERVICE VOL 5V 500mA AUX IN SERVICE MUTE 5V 500mA DC 14V 2.5A AUX IN FUNC.
Connect your NFC compatible device via Bluetooth to the Wireless Audio Portable using this simple set-up procedure and play music on the device through the Wireless Audio Portable. To connect the Wireless Audio Portable to a Bluetooth device ff The NFC function is built into Android devices running Android OS 4.1 Jellybean or later. -- If your device is running an Android OS earlier than Android OS 4.
f You may be required to enter a PIN code (password) when connecting the Bluetooth device to the Wireless Audio Portable. If the PIN code input window appears, enter <0000>. f The Wireless Audio Portable supports SBC data (44.1kHz, 48kHz). f The AVRCP feature is not supported. f Connect only to a Bluetooth device that supports the A2DP (AV) function. f You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function. f Only one Bluetooth device can be paired at a time.
Other Notes ENG Troubleshooting Before requesting service, please try the following solutions: The unit will not turn on. Sound is not produced in AUX mode. • Connect the power plug to the outlet. • Check the power of the external device and • Your player will not turn on if the battery is whether the music is playing or not. completely drained. Recharge the battery • Make sure the AUX mode is selected. and turn the player on again.
Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
Cleaning Precautions • Never use alcohol, solvents, waxes, benzene, thinners, air freshener, or lubricants to clean the product or spray insecticide on the product. -- Using any of these materials can discolor the exterior coating or cause it to split or peel off, or remove the labelling on the product. • To clean the product, unplug the power cord, and then wipe the product with a clean, dry, soft cloth (Microfiber, cotton). -- Avoid leaving dust on the product. Dust can scratch its the surface.
Ce qui est inclus ff Lors de la charge d’un téléphone intelligent par une connexion USB, la pile pourrait se décharger plus rapidement. -- La charge du téléphone intelligent par le port de service (USB) prend plus de temps que celle de l'unité à l'aide de l'adaptateur. Il peut seulement être chargé si le produit est allumé. Vérifiez si vous avez reçu les accessoires fournis ci-dessous. L'apparence des accessoires peut différer légèrement des illustrations.
Utilisation de la fonction NFC ff La fonction NFC est intégrée aux périphériques Android tournant sous Android OS 4.1 Jellybean ou une version ultérieure. -- Si votre appareil utilise une version Android OS moins récente que Android OS 4.1 Jellybean, vous devez télécharger l'application 'Samsung NFC Connection' de Android Market pour utiliser la fonction NFC. ff La position de l’antenne NFC diffère sur les périphériques. Repérez la position de l’antenne NFC avant le branchement.
f Il peut vous être demandé d’entrer un code PIN (mot de passe) lors de la connexion du périphérique Bluetooth au Audio Portatif Sans fil. Si la fenetre d’entree du code NIP s’affiche, entrez <0000>. f Le Audio Portatif Sans fil prend en charge les données SBC (44,1 kHz, 48 kHz). f La fonction AVRCP n’est pas prise en charge. f Connectez uniquement un appareil Bluetooth qui prend en charge la fonction A2DP (AV).
Dépannage Autres notes Avant de contacter le centre de service technique, essayez les solutions suivantes : • Débranchez le cordon d’alimentation de la Le SoundShare (jumelage du téléviseur) a prise, puis rebranchez-le. • Vérifiez si les boutons correspondent aux échoué. • Assurez-vous que votre téléviseur prend fonctions que vous souhaitez activer. en charge la fonction SoundShare. (http:// Aucun son n’est produit. www.samsung.
Avertissements POUR ÉVITER LES RISQUES DE CHOC ÉLECTRIQUE, NE DÉMONTEZ PAS LE CAPOT. L’APPAREIL NE CONTIENT PAS DE PIÈCES RÉPARABLES PAR L’UTILISATEUR ; CONFIEZ L’ENTRETIEN DE CET APPAREIL À DU PERSONNEL QUALIFIÉ. MISE EN GARDE RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR Ce symbole avertit l’utilisateur de la présence d’une tension dangereuse à l’intérieur de l’appareil. Ce symbole avertit l’utilisateur de la présence de directives importantes dans la documentation accompagnant cet appareil.
cordon d’alimentation et communiquez avec le centre de service de Samsung. • Si vous percevez une odeur de gaz, aérez immédiatement la pièce. Ne touchez pas au cordon d’alimentation du produit. Ne mettez pas le produit en fonction et hors fonction. • N’exposez pas le produit à des coups ou à un impact soudain. Ne percez pas le produit à l’aide d’un objet pointu.
communiquez avec samsung dans le monde entier Pour toutes questions ou observations concernant les produits Samsung, veuillez consulter le Centre de service à la clientèle SAMSUNG. Pays Centre de contact Site Web ` North America CANADA 1-800-SAMSUNG(726-7864) MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/ca (English) www.samsung.com/ca_fr (French) www.samsung.com U.S.A 1-800-SAMSUNG(726-7864) www.samsung.