Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Instructions on how to use the memory card Be sure to format the memory card (see p.87) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time.
Warning indicator There are several warnings that may appear on the LCD display CARD ERROR! Memory card error Turn off the camera power and turn it on again Insert the memory card again Insert the memory card and format the memory card (p.87) MEMORY ERROR! Internal memory error Turn off the camera power and turn it on again Format the memory with the memory card removed. (p.
Downloaded From camera-usermanual.
Before contacting a service centre Camera does not take images when pressing the Shutter button There is insufficient memory capacity Delete unnecessary image files The memory card has not been formatted Format the memory card (p.87) The memory card is exhausted Insert a new memory card The memory card is locked Refer to [CARD LOCKED!] error message (p.97) The camera’s power is off Turn the camera power on The battery are exhausted Insert fresh batteries.
Before contacting a service centre The camera buttons do not operate Camera malfunction Remove/ re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera.
Specifications Type Image Sensor Effective Pixel Total Pixel 1/2.5" CCD Approx. 5.0 Mega-pixel Approx. 5.1 Mega-pixel SHD Lens f = 4.6 ~ 22.2mm Focal Length (35mm film equivalent : 28 ~ 135mm) Lens F No. F3.3 ~ F4.8 Still Image mode : 1.0X ~ 5.0X Digital Zoom Play mode : 1.0X ~ 8.0X (depends on image size) LCD Monitor 2.
Specifications Image Size Storage Capacity (25MB) Image Play Type Editing Interface Power Source Dimensions (WxHxD) Weight Operating Temperature Operating Humidity Software Camera Driver Application Special Features 5M : 2592x1944 4M : 2272x1704 3M : 2048x1536 2M : 1600x1200 1M : 1024x768 VGA : 640x480 5M : Super Fine 9, Fine 18, Normal 26 4M : Super Fine 11, Fine 23, Normal 34 3M : Super Fine 14, Fine 28, Normal 41 2M : Super Fine 23, Fine 44, Normal 64 1M : Super Fine 53, Fine 96, Normal 132 VGA :
Downloaded From camera-usermanual.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start Programs ArcSoft PhotoImpression 4 PhotoImpression 4]. The following screen will appear. [ Help Button ] [ Command Button ] [ Tool Bar ] Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
FAQ When the movie clip doesn’t play back on the PC When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. When the correct software for playback of a movie is not installed Install the codec as listed below. [Installing codec for Windows] 1) Insert the CD provided with the camera 2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD codex-1[1].1.0.exe file.
FAQ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly If a PC (Windows 98) is turned on for a long time and connect the camera repeatedly, the PC may not recognise the camera. In this case, re-start the PC. If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC.
MEMO Downloaded From camera-usermanual.
MEMO Downloaded From camera-usermanual.
MEMO Downloaded From camera-usermanual.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.
